1.
Structural Properties of Glass Fibre Reinforced Cylindrical Laminated Veneer Lumber;
玻璃纤维增强圆筒形单板层积材的性能研究
2.
They are manufactured by high-grade stainless steel.
圆简形机箱内外两层不锈钢材板，中间夹保温层。
3.
Nondestructive Testing of MOE of LVL Based on Single-chip Microcomputer
基于单片机的单板层积材弹性模量的无损检测
4.
A lightweight cylindrical box used to hold small articles of apparel.
圆筒形纸板盒轻质的圆柱形盒子，用于装小饰物
5.
bandbox:a lightweight cylindrical box used to hold small articles of apparel.
圆筒形纸板盒:轻质的圆柱形盒子,用于装小饰物。
6.
Study on LVL Bending Creep Properties and Its Failure Mechanisms;
单板层积材弯曲蠕变特性及破坏机理的研究
7.
Study on Bamboo/Wood Composite Strengthened Laminated Veneer Lumber Procedure by Impregnating Resin Method;
浸渍法生产竹木复合强化单板层积材工艺研究
8.
Research on the Elastic Model and Technology of Composite Poplar LVL;
复合型杨木单板层积材刚度模型及工艺研究
9.
Study on the Structural Performance of Laminated Veneer Lumber (LVL) Beams;
单板层积材（LVL）受弯构件的结构性能研究
10.
Study on the System of Laminated Veneer Lumber Elastic Modulu On-Line Detection;
单板层积材弹性模量在线检测系统研究
11.
a board measure = 1980 board feet.
木材体积单位=板英尺。
12.
The Mechanical Properties of Bamboo Reinforced Poplar Laminated Veneer Lumber(LVL) after Hot-moisture Treatment;
湿热条件下竹材增强单板层积材力学性能的研究
13.
The Exploration of Reinforcing Mechanics Property of Laminated Veneer Lumber (LVL) with Twisted Bamboo Ties;
加捻竹束的预应力对单板层积材增强效应的探索
14.
Study on the Thickness Calculation Method of Viscoelastic Materials Cylinder Liquid Tank
圆筒形黏弹性材料液体储罐壁厚计算方法研究
15.
Metal Materials and Its Welding Technology for Cylindrical Pressure Vessels Using for Pulping
圆筒形蒸煮压力容器金属材料及焊接技术
16.
Analysis on the Deformation of Cylinder in Perfectly Plastic Material with Different Elastic Modulus in Tension and Compression
材料拉压不同模量及理想塑性的圆筒变形分析
17.
Scattering of SH-Wave by Semi-Cylindrical Alluvial Valley above Subsurface Structure;
SH波对浅埋圆形结构附近半圆形沉积层的散射
18.
Two or more layers of single- or double-wall corrugated board may be laminated together to form blocks or pads.
两层或更多层的单面或双面瓦楞纸板可层叠在一起形成块状材料或衬垫材料。