1.
Research on Numerical Simulation of the Multi-field during Gas Preheating and Baking Process in the Drained Aluminum Reduction Cells;
导流型铝电解槽燃气预热焙烧过程中多场数值仿真研究
2.
Design of Moulding Line and Mold Shell Baker Burning Hot Producer Gas
燃热脏煤气模壳焙烧炉及其浇注生产线的设计
3.
The Development and Application of High-temperature Fume Preheating Technology on the 75kA Aluminum Reduction Cell;
高温烟气焙烧技术在75kA预焙槽上的开发应用
4.
Analysis on gas flue treatment of open type baking furnace of prebaked Anode
预焙阳极敞开式焙烧炉烟气治理方法探讨
5.
Application of Apron Heat-exchangers in Acid Making With Flue Gas from Roasting.
板式换热器在焙烧烟气制酸中的应用
6.
fluosolids roasting
流(态)化燃烧, 沸腾焙烧
7.
"Before mixing with the products of combustion, the air is preheated."
空气在与燃烧生成物混合之前要进行预热。
8.
Investigation on Superadiabatic Combustion of Lean Premixed Gases in Porous Media;
稀薄预混气体在多孔介质中超绝热燃烧的研究
9.
Industrial Application of Air Preheater Set Additionally for Inflamer of Ethylene Cracking Furnace
乙烯裂解炉燃烧器增设空气预热器的工业应用
10.
Dynamic tracking F-PFC of fuel oil feeding temperature for anode baking
阳极焙烧燃油供给温度的模糊预测函数控制
11.
direct gas-heating system
煤气直接燃烧加热系统
12.
The fuel used for heating is either blast furnace gas or coke oven gas. The combustion air is always preheated to improve fuel utilization.
用来加热的燃料不是高炉煤气就是焦炉煤气。燃烧用风通常要预热，以提高燃料的利用率。
13.
Precombustion technology for 240 spark plug gas engine
240火花塞式燃气机预燃燃烧技术研究
14.
Prebaked Electrolytic Tank Control System Based on PLC and Expert PID Controller;
基于PLC与专家控制器的电解槽预焙烧燃烧控制系统
15.
The Combustion Control of Firebox in Solid Waste Incineration with Retort Pyrolysis Gasification;
干馏热解气化焚烧炉燃烧室的燃烧过程控制
16.
direct-heating gas burner
直接加热煤气灯,直接加热煤气燃烧器
17.
Combustion Mechanism and Flame Characteristics of the Superadiabatic Combustion of Premixed Gases in Porous Media;
多孔介质中预混气体超绝热燃烧机理及其火焰特性的研究
18.
Temperature Distribution of Gas/Solid Grids and Heat Transfer Characteristics in a Porous Media Combustor;
多孔介质预混燃烧中的气固温度分布及传热特性研究