1.
Medium and Large Sized Butterfly Valve Body's Foam Mold CAD and Quality Control for the Foam Pattern;
中大型蝶阀阀体发泡模具CAD及泡沫模样质量控制
2.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
3.
This is a gate valve (check valve, butterfly valve, cut-off valve, magnetic valve, remote valve, relief valve, throttle valve, cock).
这是一个闸阀（止回阀、蝶阀、切断阀、电磁阀、遥控阀、安全阀、节流阀、旋塞）。
4.
They are superior in "versatility" as compared to a gate or globe valve.
与闸阀或截止阀相比，蝶阀具有更好的"通用性"。
5.
General purpose industrial valves-Flanged and wafer butterfly valves
GB/T12238-1989通用阀门法兰和对夹连接蝶阀
6.
Marine center-pivoted butterfly valves
GB/T3036-1994船用中心型蝶阀
7.
Disk valves are commonly used when solids are in the aerated state.
蝶阀通常用在固体处于充气状态的地方。
8.
High-strength stem materials with one-piece thru-disc design.
高强度阀杆材料,采用整体穿过蝶板的设计技术。
9.
Lift out the disc holder assembly from the body of the valve.
从阀门的阀体内提起阀瓣固定器总成。
10.
Tag location for gate and globe valves is typically on the valve yoke or body/bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/阀盖法兰上。
11.
This mansion adopts our wafer butterfly valves and check valves wholly.
该大厦全部采用我公司生产的对夹蝶阀、蝶式止回阀。
12.
A butterfly isolation valve cannot be installed directly to the valve inlet flange, as the disc will contact the orifice plate.
蝶阀隔离阀不能够直接安装在阀门进口法兰上，因为其阀瓣将会接触到节流板。
13.
Check valve and butterfly valve combinations are very popular; normally a short spool piece is required between the valves.
止回阀与蝶阀的连接是经常发生的事,通常需要在这两种阀门之间加上一节短短的阀槽。
14.
Disc, the trim part of butterfly valves, rotates with the stem to open/close and modulate the valve.
蝶阀是随阀杆一起转动的蝶板作启闭件，用以实现阀门的开启，关闭与调节。
15.
Marine duo-eccentric-pivoted butterfly valves
GB/T3037-1994船用双偏心型蝶阀
16.
Selector switches for the by-pass butterfly valve is located on MCC2.
旁通电动蝶阀的选择制设在MCC2上。
17.
Development of Butterfly Valve Parametric Design System and Optimal Design
蝶阀参数化设计系统开发及优化设计
18.
Parametric Design of Three-Eccentric Butterfly Valve Based on CAD/CAE Integrated
CAD/CAE集成的三偏心蝶阀参数化设计