1.
Study on Square Box Bolt Welding Girder Steel Bridger Interface Friction-increasingcoat;
方箱式栓焊梁钢桥梁连接面增摩涂层的研究
2.
Study on the Response of External Welded Flange-bolted Web Joints Exposed to Fire
梁柱栓焊混合边节点火灾响应特性研究
3.
Fracture Mechanism, Cyclical Performance and Design Recommandations of Welded Flange-Bolted Web Beam-To-Column Rigid Connections in Steel Moment Frames under Seismic Load;
钢框架梁柱栓焊刚性连接的滞回性能、破坏机理及抗震设计建议
4.
Mechanical Behavior of Bolt-weld Joints between Square Concrete-filled Tubular Column and Reduced Beam Section
方钢管混凝土柱—削弱钢梁端栓焊连接节点受力性能
5.
However, the stud welding roots in the negative moment region of the beam are often subjected to the joint action of shear stress cycling of the studs and tensile stress cycling of steel girder flanges.
但在负弯矩处栓钉焊趾往往承受栓钉剪应力循环和钢梁翼缘拉应力循环的共同作用。
6.
beam tape automated bonder
梁式引线带自动焊接器
7.
The box corner welds were made with E70 electrodes.
箱型梁内角部焊缝所用的电焊条为E70。
8.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
9.
Improvement of Stud Welding Process And Increase Qualified Rate of Welding
改进栓钉焊接工艺 提高焊缝一次合格率
10.
EFFECTS ON SEISMIC STRENGTHENING OF COUPLING BEAMS WITH OR WITHOUT BOLT CONNECTIONS IN BEAM SPAN
连梁抗震加固中梁跨内有无螺栓连接的影响
11.
STUDY ON THE SOLDER WIRE FOR SUBMERGED-ARC AUTOMATIC WELDING OF 15MnVN_q BRIDGE STEEL
15锰钒氮桥梁钢埋弧自动焊焊接材料的研究
12.
Simulation and Optimization of Bi-Slotsteel Welding Beam with the Clapboard Based on Finite Element Analysis
基于有限元带隔板双槽钢焊接梁焊接仿真优化
13.
Remove transmission crossmember bolts, and lower rear of engine.
拆卸变速箱横梁螺栓，并降低引擎后部。
14.
The cross girder center segments of the bents were field bolted.
构架横梁的中间段在工地用螺栓连接。
15.
Fatigue behavior of studs in a composite beam based on fracture mechanics
基于断裂力学的组合梁栓钉疲劳性能
16.
WELDING TECHNOLOGY,WELDING MANAGEMENT AND THE QUALITY CONTROL OF THE STEEL BOX GIRDER OF HUANGPU BRIDGE OF PEARL RIVER IN GUANGZHOU
广州珠江黄埔大桥钢箱梁环缝焊接工艺、焊接管理及焊接质量控制
17.
Fillet welded;Screwed and plugged;Quick release;Flanged and bolted;Flanged and bolted 2
角焊;旋拧插塞式;速释;带法兰以螺栓固定;带法兰以螺栓固定 2
18.
Analysis on Welding Residual Stress with ANSYS;
基于ANSYS的焊接梁残余应力分析