1.
Research on Design and Analysis Technology of Supporting Part in CNC Gear Hobbing Machine;
数控滚齿机支承部件设计与分析技术研究
2.
The fork of a pole or other support.
柱子或其它支承物的叉状部件.
3.
They can be pressed into the housing bore directly.Linear ball bearings are only suitable for linear motion.
直线运动球轴承只能用于直线运动，不能作为旋转运动部件的支承。
4.
FEM Analyses on Forming Mechanics of Inclusion Defects Inner Heavy Backup-Roll Forging
大型支承辊锻件内部夹杂性缺陷形成机理的FEM分析
5.
"Pier: In Building construction, a vertical load-Bearing member such as an intermediate support for adjacent ends of two Bays or spans."
墩:建筑构造中竖直的承重构件,如桥梁中支承两个开间(或跨度)的端部的桥墩。
6.
This equipment is made up of kiln body, support device, supporting device with shelf, moving kiln head, sealing device for kiln tail, burning device and etc. parts.
该设备由筒体、承装置、档输支承装置、动装置、动窑头、尾密封装置、烧装置等部件组成。
7.
roll-chock washing machine
轧辊轴承部件清洗装置
8.
The cylinder Block of liquid-cooled engines forms the Basic framework of the engine. Other parts are attached to the cylinder Block or are assembled in it.
水冷发动机的气缸体是发动机的基本构件,其它部件都支承或安装在它上面。
9.
"Capital:In architecture, the crowning member of a column, pier, pilaster, or other vertical form, providing a structural support and transition for the horizontal member (entablature) or arch above."
柱头:建筑中,柱子、墩、壁柱等的顶部,在结构上支承其上的梁、额枋、檐部或拱等构件。
10.
Flow-induced vibration analysis for the secondary support assembly of reactor internal
堆内构件防断支承组件流致振动分析
11.
Whatever these turnable parts require a strong stand to aial radial load and tilting moment, this rotary kind of slewing ring will be your best choice.
这种支承受轴向力、倾翻力矩且两大部分需相对旋转的机械最理想的配套件。
12.
All bearings are on immovable supports at the same elevation.
全部轴承都位于同样高度不可动的支承上。
13.
ANNEX 2 DOMESTIC SUPPORT: THE BASIS FOR EXEMPTION FROM THE REDUCTION COMMITMENTS
附件2 国内支持：免除削减承诺的基础
14.
The supporting case is the outer enclosure of the gyro component.
支承壳体是陀螺组件的外壳。
15.
The Effect to Stability of Steel Members by Bracing Location;
支撑位置对钢构件稳定承载力的影响
16.
The Stability Analysis for the Frame of the Aluminum Ingots Continuous Casting Machine;
铝锭连续铸造机支承件的稳定性分析
17.
Study on Ultimate Bearing Capacity of Fastener-style Tubular Steel Falsework
扣件式钢管模板支架极限承载力研究
18.
Contact stress anslysis of rotary-support component under tractive rolling contact
回转支承构件牵引滚动接触应力解析