1.
Micro Drawing of 3003 Aluminum Alloy Cup;
3003铝合金微圆筒拉深成形研究
2.
Research on Micro-Forming Process of C2680 Yellow Brass Foil;
C2680黄铜箔微圆筒拉深工艺研究
3.
Mechanical Analysis and Optimism Design for the Limiting Drawing Parameter of the Cup-drawing Process;
圆筒件拉深的力学分析及极限拉深系数的优化
4.
Approximation Calculation of Drawing Technology of Flange Cylindrical Parts
有凸缘圆筒形件的拉深工艺计算分析
5.
The Numerical Simulation of Blank Hold Force of Cylinder Part Drawing Based on Dynaform
基于Dynaform的圆筒件拉深压边力数值模拟
6.
With square blank to draw cylinder is a newly technology.
采用方形坯料深拉延圆筒形件是一项新技术。
7.
Numerical Simulation and Analysis of the Cool-extrusion Process of a Cylinder Part
圆筒件冷拉深成形工艺分析及数值模拟
8.
drum stenter, drum tenter
圆筒拉幅烘燥机《针》
9.
A Brief Discussion on the Calculating Method of the Drawing Technique of the Wide Flange Tubby Work;
宽凸缘筒形件拉深工艺计算方法初探
10.
Analysis on Thickness of Pressure-lubricating Deep Drawing of Magnesium Alloy Cylindrical Cups
镁合金筒形件压力润滑拉深壁厚分析
11.
Development on the CAD system of cylindrical parts drawing die based on Inventor
基于Inventor的筒形件拉深模CAD系统开发
12.
A Study on Stability of Deeply-Embedded Large-Diameter Cylindrical Structure in Soft Ground;
软土地基上深埋式大圆筒结构稳定性研究
13.
The Energy Dissipation Experiment and Mechanism Study of Circular Stilling Wells;
圆形深筒式消力井试验及消能机理研究
14.
Finite Element Analyses for Cyclic Bearing Capacity of Large-diameter Cylindrical Structure in Soft Ground
深厚软基上大圆筒结构循环承载力有限元分析
15.
A Study on Chinese Ancient String Bowed Instrument with Cylindrical Tube Resonator: The Change of It s Form;
中国古代圆筒类拉弦乐器形制演变研究
16.
The Optimum Autofrettage Analysis of Thick-Walled Cylinder of the Material of Different Tension and Compression;
拉压异性材料厚壁圆筒的最佳自增强分析
17.
Analysis on the Deformation of Cylinder in Perfectly Plastic Material with Different Elastic Modulus in Tension and Compression
材料拉压不同模量及理想塑性的圆筒变形分析
18.
Finite Element Analysis of Ultrasonic Traveling Wave Micro-fluid Driving Annular and Cylinder Model
超声行波微流体驱动圆环和圆筒模型的有限元分析