1.
Research on Laser Cladding Wear and Corrosion Resistance Layers on 45# Steel
45钢表面激光熔覆耐磨耐蚀涂层研究
2.
Erosive Simulation Analysis and Preparation of Laminated Composite Pipe with Wear-resistant and Anti-corrosive Properties;
耐磨耐蚀层状复合管的制备及其冲蚀模拟分析
3.
Theoretical and Experimental Research of Wear&Corrosion Resistance Films for Ring Traveler;
钢丝圈表面耐磨耐蚀涂层的理论与试验研究
4.
The Experimental Research of Wear & Corrosion Resistant Technology for Partial Surface of the Piston Rod;
活塞杆局部表面耐磨耐蚀处理技术的试验研究
5.
A High Degree of Corrosion Resistance,Temperature Resistance,Wear Resistance,High Toughness Heavy Duty Coatings:ChemLINE 784
高度耐腐蚀、耐温、耐磨、高韧性重防腐蚀涂料ChemLINE 784
6.
Seamless, non-shrinkage, wearing-resistant, anti-scar, pressure proof, impact-proof, temperature-resistant, acid ＆ alkali resistant, water-proof and corrosion resistant engineering materials.
无缝、不收缩、耐磨、耐刮、耐压、耐冲击、耐温、耐酸碱、防水、防蚀工程材料。
7.
Study on Anticorrosion and Antiwear Coatings Manufactured by High Frequency Induction Cladding
高频感应熔覆制备耐蚀耐磨涂层研究
8.
Valve body uses comol material,lt is corrosion resistant and wear and tear resistant.
阀体材质络钼钢，耐腐蚀、耐磨损、经久耐用。
9.
Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC Composite
Si_3N_4-SiC复相耐磨材料的冲蚀磨损性能
10.
Study on coating technology of wear and corrosion resistance for hydraulic turbine
水轮机用耐磨蚀磨损涂层技术的研究
11.
Analyze of Abrasion Damage in Hydraulic Turbine and a New Type of Wear Resistant Material;
水轮机磨蚀损伤分析与耐磨蚀新材料研究
12.
A variety of coatings may be provided on request to resist corrosion or abrasion.
可以根据耐腐蚀或耐研磨要求提供各种涂层。
13.
If surface treatment is conducted, the wearability and corrosion resistance may be further improved.
如施以表面处理可进一步提高耐磨性和耐蚀性。
14.
The Study of Test Method of Erosion Resistance of Refractory at High Temperatures;
耐火材料高温耐冲蚀磨损性能试验方法研究
15.
Study on the Preparation of Mo/Al_2O_3 Composites and Its Wear and Corrosion Resistance
Mo/Al_2O_3复合材料的制备及耐磨耐腐蚀性研究
16.
The Research Progress of Amorphous Nano-composite Coating with High Corrosion and Wear Resistance
高耐蚀耐磨非晶纳米复合涂层的研究进展
17.
Antiwear and Anticorrosion Behaviors of Magnetron Sputtered (Ti_xAl_y) N Film on 6063 Aluminum AUoy
铝合金表面(Ti_xAl_y)N薄膜构成及耐磨、耐蚀性探讨
18.
Screw bat of feed hopper abopted with alloysteel,special handing on surface, durabie in heat,wear and corrosion.
螺杆料筒采用优质合金钢，表面氮化处理，耐热、耐磨、耐腐蚀。