1.
Influence of Surface Remelting Treatment by Plasma Beam Scanning on Microstructure and Performance of Hardened Layer for Boron Cast Iron
等离子束表面微熔处理对硼铸铁硬化层组织与性能的影响
2.
Influence of Paratoluene Sulphonic Acid-hardened Furan Resin Sand on the Surface Layer Microstructure of Nodular Iron Castings
磺酸硬化呋喃树脂砂对球铁件表层组织的影响
3.
Hardening, as of tissue, by such impregnation.
硬化组织的硬化，通过如上的钙化作用
4.
The normal hardening of aging tissue.
老衰组织的正常硬化
5.
Microstructure and Microhardness Change of Fe-Cr-C Alloy Layer Prepared by Electron Beam Scanning before and after Heat Treatment
电子束扫描制备铁-铬-碳合金层热处理前后组织与硬度的变化
6.
Microstructure and Depth of Harden Layer of 40Cr Steel Melting Treated with Different Lasers
不同激光器熔凝处理40Cr钢硬化层的显微组织及深度
7.
Toluene Sulfonic Acid(TSA) Hardening Furfural Resin-bonded Sand on the Surface Microstructure of Ductile Iron
对甲苯磺酸硬化呋喃树脂砂对球铁件表层组织的影响
8.
The amorphous layer had more compact structure, higher hardness, lower roughness and higher electrical resistance.
结果表明，该非晶层相对于直接阳极化层，组织致密、硬度高、粗糙度低、电阻高。
9.
A mass or deposit of such material.
一块或一层骨化组织
10.
Chronic interstitial inflammation of any tissue or organ.
硬化，硬变任何组织或器官的慢性间质炎症
11.
Analysis on Structural Performance of 4CrMo Cold Rolling Worke Roll;
4CrMo超深淬硬层冷轧工作辊组织性能分析
12.
Effects of Pushed Bias on Microstructure and Hardness of TiAlN/TiN Coating
基体负偏压对TiAlN/TiN膜层组织成分及硬度的影响
13.
Influence of Ti target current on microstructure and hardness of CrTiAlN coatings prepared by magnetron sputtering
Ti靶电流对CrTiAlN镀层组织结构及硬度的影响
14.
Analysis on Microstructure and Hardness of Brush Plating Coating on High Temperature Resistance Alloy
耐高温合金电刷镀镀层显微组织及硬度分析
15.
Microstructure and Hardness of Cr,B,C Ternary Cast-infiltrated on 45 Steel Surface
45钢表面铬、硼、碳三元铸渗层的组织和硬度
16.
Effect of Ceramic Phase on Microstructure and Property of Ferro-base Surfacing Layer
陶瓷硬质相对铁基堆焊层组织与性能的影响
17.
Microstructure and Properties of WC-steel Composite Coating Produced by Argon-arc Welding
氩弧熔覆WC-钢结硬质合金涂层组织性能研究
18.
Microstructure and properties of WC-(W,Ti)C-(Ta,Nb)C-Co coated carbide alloy
WC-(W,Ti)C-(Ta,Nb)C-Co涂层硬质合金的组织与性能