1.
Research of Compound Rolling Deformation Rules and Technology Optimize on Brazing Foil of Aluminum Alloy;
铝合金钎焊箔材复合轧制规律及工艺优化
2.
Study on the influence law of the rolling curve affected by rolling radius during cam shaft cross wedge rolling
楔横轧凸轮轴轧制半径对辊形曲线影响的规律
3.
The Simulation Study of the Wall Thickness Distribution Rules of Steel Tube During Tandem Rolling Processes at φ89 Tandem Pipe Rolling Mill
φ89连轧机组钢管轧制壁厚规律仿真研究
4.
The simulation result shows that the effect by the feeding angle and toe angle on the distribution of cross-rolling characteristic values along the rolling centre line in cross-rolling operation is following a certain law.
模拟结果表明，斜轧送进角和辗轧角对沿轧制中心线斜轧特征值分布形态的影响有一定的规律。
5.
STUDY AND PRACTICE OF DEFORMATION LAW OF LEAST BUTTERFLY PASSES ROLLNG ANGLE STEET
最少蝶式孔型轧制角钢变形规律的研究与实践
6.
On Deformation Laws and CAPP System for Radial-axial Ring Rolling;
环件径轴向轧制变形规律与CAPP系统研究
7.
Bond Rolling Principles of Laminated Precision Alloy Materials;
精密合金层状复合材料轧制变形规律的研究
8.
The Researches on Deformation and Fracture Behaviors of Porous Materials Prepared by Spray Deposition During Compression and Rolling;
喷射沉积材料压缩和轧制变形规律研究
9.
Study on Recrystallization Behavior of Ferritic Rolled IF Steels;
铁素体区轧制IF钢退火过程再结晶规律的研究
10.
FEM Study on Metal Deformation Law of Broad Strip Rolling;
宽板轧制过程金属变形规律的有限元法研究
11.
Bond Rolling Principles and Heat Treatment of Cu/Al Clad Sheet
铜铝轧制复合变形规律及热处理的研究
12.
The Researches on Technology and Deformation Mechanism of Porous Materials Prepared by Spray Deposition during Frame-Confined Rolling;
喷射沉积坯料外框限制轧制工艺及变形规律研究
13.
Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
14.
Research on the Theories of Taper-rolling Process of Endless Spirals and FEA Simulation;
连续螺旋叶片锥辊异面轧制过程的有限元模拟与成形规律研究
15.
FEM Study on Metal Deformation Law of Asymmetry Induced Spreading;
不均匀大宽展轧制过程金属流动规律有限元模拟
16.
The Research on Guiding Roll Effect on Roundness Tolerance during Ring Rolling
环件轧制中导向辊对环件圆度误差影响规律研究
17.
Research on Roundness Tolerance in Ring Rolling with Constant Guiding Force
恒定导向力环件轧制中圆度误差变化规律的研究
18.
Theoretical and Experimental Research on the Spread of the Head of Rail in Rail Rolling by a Universal Mill
钢轨万能轧制过程轨头宽展规律的理论和实验研究