1.
Research of Tool Interference Checking Algorithm for Machining Complex Helicoid;
复杂螺旋面加工中刀具干涉检查算法研究
2.
Research on Machining Method and Special NC Equipment of Rotor Helical Convolute of Single Screw Compressor;
单螺杆压缩机转子螺旋面加工方法及专用数控装备研究
3.
The Method of NC Program about Rough Cut of Helicoid Base on Helix-milling;
基于螺旋线铣削的螺旋面粗加工数控编程方法
4.
Research on the Processing Principle and Technology Method of Numeric Control Boring of the Inner Spiral Surface;
内螺旋曲面数控镗削加工原理及工艺方法研究
5.
Surface Modeling and Cutter Location Planning of Marine Propeller with 5-axis Machine Tools;
船用螺旋桨曲面造型及五轴数控加工刀位规划
6.
Study on Manufacturing Technique of the Inner Helical Surface
内螺旋曲面包络刨削加工位置的计算研究
7.
Design on Contour of Milling Cutter in Machining Complex Spiral Curved Surfaces
复杂螺旋曲面铣削加工刀具的廓形设计
8.
Flow Field Analysis of Compulsive Spiral Flow in Finishing the Inner Surface of Rifle Barrel
强制螺旋流对身管内表面光整加工的流场分析
9.
Design Method and Fabrication Technology of the Shaft of Screw Press
螺旋挤浆机螺旋轴结构优化设计与加工工艺
10.
Analysis of Machine Tool Motion in Rotary Burr Machining
旋转锉螺旋刃加工时机床运动的分析
11.
THE CALCULATION OF THE PROFILE AND THE CURVATURE OF THE TOOL FOR PRODUCING HELICOID SURFACES
加工螺旋面的工具截形及其曲率的计算——通用程序的数学模型
12.
Surface Roughness Forecasting of Spiral Bevel Gear Based on Artificial Neural Network
基于人工神经网络的螺旋锥齿轮磨削加工表面粗糙度预测
13.
The“ Tool Pan Tilted method” is a high effect method to generate spiral-bevel gears and Hypoid gears.
刀倾半展成法是加工螺旋锥齿轮和准双曲面齿轮的有效方法。
14.
The helicoidal surfaces are produced mostly by form cutting with forming cutters of end mill type, side mill type or disc type.
螺旋面大多数是用球头铣刀、侧铣刀、盘形刀具成形加工出来的。
15.
Radial Size Measurement and Feedback Control Technology for Milling Hyperslender Helical-surface;
超细长螺旋面铣削加工中径向尺寸的测量与反馈控制技术
16.
Study on Milling Helical-surface Machining Tech Nique with Four-axial Non-instaneous Envelop;
四自由度无瞬心包络铣削螺旋曲面加工方法研究
17.
The Research on the Free-form Surface Design and Five-Axis and High-speed NC Machining of Impeller;
螺旋桨叶轮自由曲面造型与五轴高速数控加工技术的研究
18.
A Novel Path Used in Computer-controlled Polishing Process Based on Uniform-area-increment Spiral
计算机控制抛光中基于等面积增长螺旋线的加工路径