1.
Dynamic Study and Analysis of Aluminum and Aluminum Alloy Melt in the Foaming Process;
铝和铝合金熔体泡沫化过程的动力学研究及分析
2.
Thermal Decomposition Kinetics of Titanium Hydride and Aluminium Alloy Melt Foaming Process;
氢化钛热分解反应动力学与铝合金熔体泡沫化过程研究
3.
Al-Si foam was fabricated by direct melt foaming.
采用熔体发泡法制备泡沫铝硅合金。
4.
Preparation and Analysis on the Defects of Aluminum foams via Melt-foaming method
熔体发泡法制备泡沫铝合金及其缺陷分析
5.
New Type CFF for Cleaning Molten Aluminum
铝熔体净化用的新型泡沫陶瓷过滤板
6.
Numerical Simulation of Bubble Size Distribution of 3-dimensional Aluminum Foams in Liquid State
三维液态铝合金泡沫体演化过程中泡径分布的研究
7.
EFFECT OF ALLOYING ON COMPRESSIVE MECHANICAL PROPERTIES OF THE ALUMINUM ALLOY FOAMS;
合金化对泡沫铝压缩力学性能的影响
8.
Effect of Preheating on Cell-structure of Al Alloy Foam Prepared by Two-step Foaming Method
预热对二次泡沫化法制备泡沫铝合金孔结构的影响
9.
Preparation by the Means of MFT and Investigation of the Properties of Aluminum Alloy Foam;
泡沫铝的熔体发泡法制备及其性能研究
10.
Numerical simulation of production processes of aluminum foams using air injection and melt stir
熔体吹气发泡法制备泡沫铝的准三维数值模拟
11.
Study on the Viscosity Control of Foam Aluminum Melt and the Bubble's Stability
泡沫铝熔体粘度的控制与气泡稳定性研究
12.
Metallurgy Bonding of Closed-cell Aluminum Foam with Aluminum and Aluminum Alloy Plate
闭孔泡沫铝与铝及铝合金覆板的冶金结合
13.
The Wettability Behaviors Research between Al-Ge Alloy and Vesicant of Aluminum Foams
铝锗合金对泡沫铝发泡剂的润湿性研究
14.
Experimental Study and Numerical Simulation on Bubble-melt Two-phase Flow with Gas Injection and Mechanical Stirring Relevant to the Aluminum Foam Processing;
吹气搅拌法制备泡沫铝工艺的气泡—金属熔体两相流的实验研究和数值模拟
15.
Investigation on the Melt Treatment and Homogenization of LC4 Aluminium Alloy;
LC4铝合金熔体处理与均匀化工艺研究
16.
Foaming Behavior and Compression Property of Al-alloy Foams
泡沫铝合金发泡特性及压缩性能的研究
17.
Melt purification in the course of producing aluminum alloy slab by using electrolytic aluminum melt
用电解铝液生产铝合金扁铸锭的熔体净化工艺
18.
Research on Key Technologies for Batch Preparation of Aluminum Foam Slabs by Melt Foaming Process
熔体发泡法批量制备泡沫铝板材关键技术的研究