1.
Remove the three screws that secure the seat side shield to the seat cushion frame.
拆卸固定座椅侧面防护至座椅垫支架的三个螺丝。
2.
Continue rolling the cover downward and engage the hogrings attaching the seatback cover to the seatback cushion support wires.
继续向下旋转座椅背盖，接上固定座椅背盖到座椅背垫支架线的拱起环。
3.
Seat Cushion Cover Retaining Clip Removal
座椅垫盖固定螺钉拆卸
4.
Earth-moving machinery-Seat belts and seat belt anchorages
土方机械 座椅安全带及其固定器
5.
Roll the seatback cover downward and engage the hook and loop fastener.
向下旋转座椅背盖，安装钩环固定器。
6.
The 3-year-old restraint was very poor in the frontal crash and failed to contain the head in side impact.
3岁儿童座椅固定在正面碰撞中非常差，侧面碰撞中儿童头部甩出了座椅。
7.
Position the seat back in the full upright position and secure the latch into the strikers.
定位座椅靠背于直立位置，固定门闩到差速锁闩眼。
8.
Position seat on floor pan.
在底板上定位座椅。
9.
Firmly press downward to seat seal on flange.
稳固地向下压将座椅密封压入凸缘中。
10.
Separate the cover from the cushion.
从座椅垫移下座椅盖。
11.
The chair is secure now since it is nailed securely.
用钉子固定后，椅子就牢固了。
12.
Disengage the cover zipper and route the zipper end between the inboard seatback and seat cushion frame.
取下盖拉链，并且确定在内侧座椅背和座椅垫架间的拉链末端路线。
13.
Earth-moving machinery--Seat index point
GB/T8591-1988土方机械司机座椅标定点
14.
crane ,overhead traveling, not on fixed support
高架起重机,无固定支座
15.
Rear Mount To Body Bolts
后固定座与车身螺栓
16.
fixed fiber-optics connectors receptacle
固定光纤连接器插座
17.
The mounting is fixed to the base.
支架固定在基座上。
18.
cause to sit or seat or be in a settled position or place.
使就座或在固定的位置。