1.
Development of High Strength and High Efficiency Iron Powder Electrode with Ultra-low Hydrogen
高强度高效率超低氢铁粉焊条的研制
2.
Effect of the nanometer CeO_2 powder on microstructure and properties of the welded joint of the iron powder electrode
纳米CeO_2粉体对铁粉焊条焊缝组织和性能影响的研究
3.
Study on Iron Based High Temperature Wear Resistance Surfacing Electrode and Welding Process;
铁基高温耐磨堆焊焊条及焊接工艺研究
4.
A bundle of pieces of iron or steel to be welded or hammered into bars.
束铁把铁片或钢片焊接或锻打成条形
5.
Study on Characteristics of Bainitic Welding Rod for Direct Built-up Welding in Rail
贝氏体焊条直接堆焊修复铁路钢轨特性研究
6.
RESEEARCH ON NODULAR IRON JOINT WELDED WITH NICKEL-IRON ELECTRODE BY MOIRE FRINGE METHOD
镍铁型焊条焊接高强球铁接头云纹实验解析研究
7.
The influence of RE on high-vanadium electrode was studied by comparative tests.
通过药皮含稀土焊条与普通焊条的对比试验，研究了稀土对高钒铸铁焊条的性能的影响。
8.
The electrodes and fluxes shall be dried according to the requirements, and the grease and rust on wires shall be cleaned before welding.
5焊接前应按规定将焊条、焊剂烘干，焊丝上的油污和铁锈等应清楚干净。
9.
Forming Process and Welding Performance of Micro-Alloyed Cast-Iron Electrode and Rod;
微合金化铸铁同质焊条（丝）成形工艺及其焊接性能研究
10.
Hydrothermal Synthesis of BiFeO_3 Powders under Loose Conditions
较为宽松条件下水热合成铁酸铋粉体
11.
An Analysis and Study of the Properties of the Matel Transfer of the Domestic Umenite Type Electrode;
国产钛铁矿型焊条熔滴过渡特性的研究
12.
The iron retention rate in noodles cooked with different iron forms fortified wheat flours
不同铁剂强化面粉在家庭制作面条中的留存
13.
Study on dynamic stability of silt subgrade subjected to train moving loading
提速条件下粉土铁路路基动态稳定性研究
14.
Study on technological conditions of preparing polymeric ferric-aluminum silicate flocculants with fly-ash
粉煤灰制备絮凝剂聚硅酸铝铁工艺条件研究
15.
A perforated iron plate or screen for sieving and grading crushed ore.
篦条筛用于筛选粉碎的矿石并分级的有孔铁板或铁筛
16.
Thecomprehensive utilization of these elements can remarkably improve the hot-crackingresistance of pure nickel electrode for welding cast iron.
综合利用这些合金元素，可显著改善纯镍铸铁焊条的抗热裂性能。
17.
Its application situation on heat shearing blade, guide plate and nodular indefinite chill roll are introduced too.
并阐述了这种焊条在热剪剪刃、机导板头、墨无限冷硬铸铁轧辊堆焊等方面的应用情况。
18.
Compared with the traditional method adjusting iron ratio of catalyst of synthetic ammonia with iron bar, this paper presents method of iron ratio adjustment with reduced type iron powder.
与传统以铁条调整氨合成催化剂铁比的方法不同,本文所提是以还原铁粉调整铁比.