1.
Ultimate strength analysis of central through-thickness cracked plate under complex load
中心穿透裂纹板在复杂载荷作用下的剩余极限强度分析
2.
Then, the fracture problem of three dimensional FGM strips with center through cracks or edge through cracks is investigated.
接着,本文研究了含有中心贯穿裂纹和边沿贯穿裂纹三维功能梯度板的断裂问题。
3.
Analysis on Performance of Axial Throughwall Crack Pipeline Repaired by Sleeve
轴向穿透裂纹管道套管修复性能研究
4.
Research on Reinforcement of Nozzle with Penetrated Crack at Intersecting Line
相贯线处含穿透裂纹接管的补强研究
5.
AN EXPERIMENTAL STUDY OF OUT-PLANE DISPLACEMENTFIELD NEAR THE TIP OF A THROUGH CRACKIN A PLATE UNDER BENDING
含穿透裂纹平板受弯时裂纹尖端离面位移场的实验研究
6.
Extensive through-thickness shear causes crack-tip necking.
大范围的穿透厚度剪切引裂纹顶端的颈缩。
7.
STRESS INTENSITY FACTORS FOR MULTI-FASTENER-HOLE STRUCTURES WITH MULTI-THROUGH-CRACKS
含多个穿透裂纹的多孔紧固件传载结构裂尖应力强度因子研究
8.
Opacity is due to crazes in the resin.
不透明是因树脂中产生裂纹。
9.
Formation Mechanism and Prevention of Center and Triangle-Zone Cracks in Continuous Cast Slabs
板坯中心裂纹和三角区裂纹的成因与防止
10.
Fracture Analysis of Piezoelectric Materials with Centric Cracks
中心裂纹压电材料板的断裂问题分析
11.
Elastic-Plastic Finite Element Analysis for Unequal-Diameter Tee Joint with Axial Through-wall Cracks at the Shoulder
焊制异径三通肩部轴向穿透裂纹弹塑性有限元分析
12.
(2) The method which used to build the unequal-diameter tee joint with axial through-wall crack has been established.
(2) 确定了肩部含轴向穿透裂纹焊制异径三通有限元模型的建立方法。
13.
This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.
研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始的。
14.
WEIGHT FUNCTION SOLUTION FOR CENTER CRACKED BRAZILIAN DISK SPECIMEN SUBJECTED TO UNIAXIAL COMPRESSION
单轴压缩下中心裂纹巴西试样的权函数分析
15.
Analysis of Cause for the Crack in the Centre of Thickness of 32 mm Hot Rolled Steel Plate
32 mm热轧条钢板厚度中心裂纹原因分析
16.
An Application of Tool Crack Testing Technology in Machining Center Processing
刀具裂纹检测技术在数控加工中心上的应用
17.
SIZE EFFECT FOR ROCK DYNAMIC FRACTURE TOUGHNESS TESTED WITH CRACKED STRAIGHT THROUGH FLATTENED BRAZILIAN DISC
用中心直裂纹平台巴西圆盘测试岩石动态断裂韧度的尺寸效应
18.
a line that passes through the center of curvature of a lens so that light is neither reflected nor refracted.
穿过曲面透镜中心的光线不会反射和折射的线。