1.
Model for the distribution of carburized case depth of spur gear in warm forming after car burizing
直齿轮“渗碳-温挤”渗碳层厚度分布模型
2.
Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.
与此类似，渗碳层厚度越大，特别是对于渗碳层厚度不一的渗碳用钢，淬火时更易产生翘曲。
3.
specified percentage decarburation
规定脱碳率的脱碳层厚度
4.
Effect of Liquid Nitriding Technology on the Thickness and Hardness of the Nitrided Layer
液体渗氮工艺对CrNiMo钢渗层厚度和硬度的影响
5.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
6.
Trail Production of Large Thickness Composites Laminate of Carbon Fiber
大厚度碳纤维复合材料层压板的试制
7.
Simulation Study on Fluidized Bed Carburizing Layer Depth Mathematic Model
流态化渗碳层深度数学模型仿真研究
8.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
9.
The relationship between the thickness of decarbonic layer of metal spring and the temperature and time heated;
金属弹簧脱碳层厚度与受热温度和时间的关系
10.
Effects of Coating Layer Thickness on Surface C Content in Carbon Steel Casting in EPC
涂层厚度对气化模铸钢件表面含碳量的影响
11.
Realizing Study of the Current Control Influencing the Carbon Deposition of Electrode
影响电极积碳层厚度的电流控制实现研究
12.
Online detecting for carburizing depth of iron and steel parts based on Online LS-SVM
基于Online LS-SVM的钢铁件渗碳层深度在线检测
13.
Microstructure and Hardness of Cr,B,C Ternary Cast-infiltrated on 45 Steel Surface
45钢表面铬、硼、碳三元铸渗层的组织和硬度
14.
Technologies for improving producing degree of low permeability carbonate reservoirs
提高低渗碳酸盐岩储集层动用程度技术
15.
Influence of plasma carburizing temperature on microstructure and properties of carburized layer for AISI 316L stainless steel
离子渗碳温度对316L不锈钢渗层组织和性能的影响
16.
Thickness Prediction of Rare Earth Chromizing Coatings on P110 Oil Casing Tube Steel Based on Artificial Neural Network
人工神经网络方法预测P110油套管钢稀土渗铬层的厚度
17.
Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating
碳氮共渗-深层稀土硼碳氮共渗复合处理
18.
Wavelet Analysis Application on Eddy Current Testing Signal Processing of Carburized Layer Depth;
小波分析在渗碳层深度涡流检测信号处理中的应用