1.
TMS320F2812-Based Power System for Electric Upsetting
基于TMS320F2812的电镦成形电源系统实现
2.
Process Parameters Calculation and Intelligent Control of Electric Upsetting;
电镦成形工艺参数的确定及智能控制的研究
3.
Research on the Upset Forging Technology of Marine Crank of 305 Crankshaft
船用305曲轴曲拐镦锻成形工艺研究
4.
Research on local upsetting finish forging process of valve blank
气门毛坯局部镦挤终锻成形工艺研究
5.
Process Research and Numerical Simulation for Upsetting Forming on the End of the Oil Tube;
油管端部镦锻成形工艺研究及其数值模拟
6.
FEM Simulation of RR Method Bend-Upset Forging of Heavy Crankshaft;
大型曲轴RR法弯曲镦锻成形有限元模拟
7.
Study on the Prediction of 1Cr18Ni9Ti Forging Property in the Heating Process;
1Cr18Ni9Ti不锈钢热镦成形工艺性能预报的研究
8.
The Property and Formation of the Plastic Hinge in Rotary Forging and Upsetting Process of Ring Billet
摆辗镦粗工艺过程中塑性铰形成与特性研究
9.
Numerical Simulation Analysis of Piercing and Upsetting Extrusion Process for Spur Gear
直齿轮冲挤——镦挤成形过程数值模拟分析
10.
Heading, riveting, and staking dies also press the metal into the design established by the shape of the tool faces.
顶镦、铆接、凿缝模也能把金属按工具面的形状压制成形。
11.
THE FINITE-ELEMENT ANALYSIS OF FORCE ON THE PUNCH DURING EXTRUSION UPSETTING PROCESS OF AUTOMOTIVE TYRE NUT
汽车轮胎螺母挤镦复合成形过程中冲头受力的有限元分析
12.
FEM numerical Simulation analysis for the cold closed upsetting-extrusion fluctuating forging of the spur gear
直齿圆柱齿轮浮动凹模冷闭式镦挤成形数值模拟分析
13.
Physical Simulation and Numerical Simulation of Stamping-extrusion and Bulge-extrusion Combining Forming for Spur Gear;
直齿圆柱齿轮镦挤胀挤复合成形的物理模拟和数值模拟
14.
Comparative Analysis and Research of RR, TR and NTR Upset-Bending Processes for Heavy Crankshaft of Continuous Grain Flow;
曲轴全纤维弯曲镦锻成形技术RR法、TR法、NTR法对比研究
15.
Virtual Design of Rolling Preform and Stamping-extrusion and Bulge-extrusion Combining Precise Forming for Spur Gear;
圆柱直齿轮滚轧制坯—镦挤、胀挤复合精成形的虚拟设计
16.
STUDY ON PRINCIPLE AND TECHNOLOGY OF UPSET-EXTRUSION FORMING SPUR GEAR BY KINETIC FORMING DIE;
浮动凹模镦挤直齿圆柱齿轮成形原理及工艺研究
17.
Research on Evolution of Void Defects in Heavy Forgings during Upsetting Process
大锻件镦粗成形中内部空洞型缺陷的演化规律研究
18.
Distinguishing on Surface Laps and Cracks of Cold Heading Steel for Big Size Coils and Analyzing on their Forming Causes
大盘卷冷镦钢表面折叠、裂纹的判别及形成原因分析