1.
Microstructure and Property of Slag Containing Vanadium are Studied by Molecular Dynamics Simulation
钒渣熔融结构与性质的分子动力学模拟研究
2.
Numerical Analysis of Flowing for High Polymer in Spinning Pack and Optimization the Structural of It;
熔融纺丝组件熔体流动数值分析及其结构设计优化研究
3.
EFFECT OF TMA ON STRUCTURE AND CORROSION RESISTANCE OF ALUMINUM COATINGS FROM MOLTEN SALT
TMA对熔融盐中铝镀层结构及耐蚀性的影响
4.
ANALYSIS OF SPRAY HEAD STRUCTURE OF FUSED DEPOSITION MODELING FOR RAPID PROTOTYPING
熔融挤压快速成型系统的喷头结构分析
5.
MELTING BEHAVIOR OF SYNDIOTACTIC POLYPROPYLENE FIBERS WITH DIFFERENT INITIAL STRUCTURES
不同初始结构间规聚丙烯纤维熔融过程中的结晶转变行为
6.
Melt Polycondensation of L-lactic Acid and the Crystallization and Melting Behavior of PLLA;
L-乳酸熔融缩聚及聚乳酸的结晶和熔融行为
7.
Structure and Properties of Layered Silicate/Rubber Nanocomposites Prepared by Melt Blending;
熔融法制备层状硅酸盐/橡胶纳米复合材料的结构与性能
8.
A Study on Morphology, Structure and Rheological Behavior of Polyethylene-Montmorillonite Nanocomposites Prepared by Melting Intercalation;
熔融插层聚乙烯—蒙脱土纳米复合材料形态结构及流变行为
9.
Studies on Transesterification, Structure, Properties of PET/PEN Melt Blended Materials;
关于PET/PEN熔融共混物的酯交换反应、结构与性能的研究
10.
Structure and Property Studies of Poly (Trimethylene Terephthalate) High-speed Melt Spun Fibers;
关于聚对苯二甲酸丙二酯高速熔融纺丝纤维结构与性能的研究
11.
Effect of Silicon Carbide Powder on Preparation of C_f/SiC Composites by Molten Silicon Infiltration
碳化硅粉体对熔融渗硅法制备C_f/SiC复合材料结构的影响
12.
Textural development of dehydration-melting in amphibolite at 1.0-3.5 GPa and 950 ℃-Effect of pressure and time
950℃、1.0～3.5GPa下斜长角闪岩脱水熔融——压力和时间对结构的影响
13.
Under other crystallization condition only single melting peak is observed.
在其它的结晶条件下观察到单熔融峰。
14.
Influence of the Boric Acid on Sintering and Crystallization Behavior of the Fused Silica
硼酸对熔融石英烧结及其晶化的影响
15.
Studies on Behavior of Melt Crystallization of PTFE/SGM Composites
PTFE/SGM复合材料熔融结晶行为的研究
16.
Technology for melt crystallization-granulation with air cooling in lower prilling tower and its application
全熔融低塔风冷结晶造粒技术及应用
17.
Study of the Melt-Textured Growth Process in Bi System Superconductors
铋系超导体熔融织构生长工艺的研究
18.
Effective Pinning Potential of the Melt Textured YBa_2Cu_3O_(7-x) Sample;
熔融织构YBa_2Cu_3O_（7-x）块材的有效钉扎势