1.
production-scale cell
生产用电解槽,大型电解槽
2.
In-depth Characteristics Extraction of Cell Voltage Fluctuation in Aluminum Reduction Cells
大型预焙铝电解槽槽电压波动特征提取
3.
Discussion on the technology of increasing the current of large prebaked cell
大型预焙铝电解槽强化电流技术探讨
4.
Study on Design and Optimization of the Electric-Magnetic Field of Large Prebaked Aluminum Reduction Cells;
大型预焙铝电解槽电磁场设计与优化研究
5.
The Simulation of the Thermal-electric Field of Large Prebaked Aluminum Reduction Cell Based on ANSYS;
基于ANSYS的大型预焙铝电解槽热电场的仿真
6.
The Simulation of the Electromagnetic Field of Large Prebaked Aluminum Reduction Cell Based on ANSYS;
基于ANSYS的大型预焙铝电解槽电磁场的仿真
7.
Study on measuring technique of instant current efficiency on large sized Al electrolytic cell
大型铝电解槽瞬时电流效率测定技术的研究
8.
Slot-type Design for 10KA Rare Earth Molten Salt Electrolysis Cell;
10KA底部阴极稀土熔盐电解槽槽型设计
9.
The Research on Optimize of Large Pre-baked Anode Cell Process Technical Conditions;
大型预焙铝电解槽工艺技术条件优化试验
10.
Research on Technology Innovation and Application of 200kA Large Prebaked Anode Aluminum Reduction Cell;
200kA大型预焙铝电解槽技术创新与应用的研究
11.
In-Depth Feature Extraction of Noise Signals in Aluminum Reduction Cells
大型铝电解槽针振信号深层特征提取方法研究
12.
Numerical simulation and optimization of busbar configuration in large aluminum electrolysis cell
大型铝电解槽母线配置的数值仿真与优化
13.
Practice on Energy Saving Process for Second Startup of Large Pre-Baked Aluminum Smelting Pot
大型预焙铝电解槽二次启动方法的实践
14.
Lower temperature aluminium reduction practices of SY300kA pre-baked anode cell
SY300kA大型预焙电解槽在较低温度下电解生产的实践
15.
large-sized generator rotor slotting machine
大型电机转子槽铣床
16.
Research for Aluminum Reduction Cells on Unsteady Heterogeneous Models and Technology of Energy Saving by Key Anode;
大型铝电解槽非稳态非均一模型及关键极节能技术研究
17.
Upgrading NCS bipolar ionic membrane electrolyzer into bipolar type zero polar distance electrolyzer
采用国内技术由NCS型复极离子膜电解槽改型为复极零极距电解槽
18.
Saving Energy Practice of Large-scale Baffleless Magnesium Reduction Cell in Production Process of Titanium Sponge Produced by Kroll Method
镁法海绵钛生产工艺中大型无隔板镁电解槽的节能实践