1.
This article breifly introduces polymer matrix composites and highights a number of welding processes, such as hot plate welding, infrared welding, induction welding, vibration welding and ultrasonic welding, etc.
本文主要介绍了热塑性复合材料的若干种焊接方法，如热板焊、红外焊、应焊、动焊、声波焊等。
2.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
3.
Craft is very good--The welding is laser welding between absorber and tube tanks,and the absorber is only one plate.
工艺精湛——集热板与排管焊接是激光焊接,并且集热板是一整块板.
4.
Surfacing on Duplex Stainless Steel Tube-plate of Heat Exchanger and Welding on Tube-port of Heat Exchanging Tube
换热器管板双相不锈钢堆焊及管板与换热管管头焊接
5.
Thermal effects of gas tungsten arc welding for thick copper plates at different welding condition
不同焊接条件下TIG焊接紫铜厚板的热效应研究
6.
STRESS FIELD OF GTAW WITH A SPOT HEAT SINK ON TITANIUM ALLOY THIN PLATE
钛合金薄板带热沉GTAW焊的应力场
7.
Research on Change Rule of Cladding Rate of Hot-rolled Aluminum Matrix Brazing Sheet
热轧铝基钎焊板包覆率变化规律研究
8.
TIG welding for austenitic stainless steel tube plate and copper pipe
紫铜换热管与不锈钢管板接头的TIG焊
9.
Research on Welding Process of Duplex Stainless Steel Tube to Tubesheet Made of 316L
双相不锈钢换热管与316L管板焊接工艺
10.
Common Problems in Welding Joint of Tubesheet and Tube for Heat Exchanger
换热器管板与换热管焊接常见质量问题的防止
11.
Development of Inductive Heater in Butt-fusion Welding Machine for Pressurized Plastic Pipes;
塑料压力管道热熔对接焊机感应加热板的研制
12.
Controlling Welding Stress, Deformation and Hot Cracking of Aluminum Alloy Thin Plates by Welding with Trailing Rotating Extrusion
随焊旋转挤压控制铝合金薄板焊接应力变形及防热裂研究
13.
Microstructure and Properties of TIG Welded Joint of Hot Rolled 410S Stainless Steel Plates
热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能
14.
"The welder is used for coil joining in a hot dip galvanizing line, where material to be processed is cold-rolled low carbon steel. "
在热镀锌线中焊机用于连接冷轧低碳钢板卷
15.
On Optimizing Technology of Thin Wall Tubes and Tube-sheet Welding in Ti Trans-heat Equipment Manufacture
钛制换热器薄壁管与管板焊接优化工艺
16.
Study on Laser Brazing with Filler Wire for Galvanized Steel Sheets and Numerical Simulation of the Thermal Process;
镀锌钢板激光填丝钎焊工艺与热过程数值模拟
17.
Titanium Argon-Arc Welding Between Laser Rapid Forming and Hot Rolled Plate
钛合金激光快速成形与热轧板材氩弧焊试验
18.
Intergranular Corrosion Susceptibility of Welded Joint of Stainless Steels
不锈钢热轧板材焊接接头的晶间腐蚀试验