1.
Summary of EPC installation project of electrolytic aluminum improvement on pre-roasting cells at Lanzhou Aluminum Plant;
兰铝大型预焙槽电解铝技改项目安装工程总承包总结
2.
Discussion on the technology of increasing the current of large prebaked cell
大型预焙铝电解槽强化电流技术探讨
3.
In-depth Characteristics Extraction of Cell Voltage Fluctuation in Aluminum Reduction Cells
大型预焙铝电解槽槽电压波动特征提取
4.
Study on Design and Optimization of the Electric-Magnetic Field of Large Prebaked Aluminum Reduction Cells;
大型预焙铝电解槽电磁场设计与优化研究
5.
The Simulation of the Thermal-electric Field of Large Prebaked Aluminum Reduction Cell Based on ANSYS;
基于ANSYS的大型预焙铝电解槽热电场的仿真
6.
The Research on Optimize of Large Pre-baked Anode Cell Process Technical Conditions;
大型预焙铝电解槽工艺技术条件优化试验
7.
Research on Technology Innovation and Application of 200kA Large Prebaked Anode Aluminum Reduction Cell;
200kA大型预焙铝电解槽技术创新与应用的研究
8.
The Simulation of the Electromagnetic Field of Large Prebaked Aluminum Reduction Cell Based on ANSYS;
基于ANSYS的大型预焙铝电解槽电磁场的仿真
9.
Practice on Energy Saving Process for Second Startup of Large Pre-Baked Aluminum Smelting Pot
大型预焙铝电解槽二次启动方法的实践
10.
Lower temperature aluminium reduction practices of SY300kA pre-baked anode cell
SY300kA大型预焙电解槽在较低温度下电解生产的实践
11.
Application and Practice of the Large-scale 306KA Prebaked Aluminum Reduction Cell with Integrated of Energy-saving Measures
306KA大型预焙阳极铝电解槽综合节能措施的应用实践
12.
Analysis on Heat Balance Characteristics under Lower Molecular Ratio and Control for 180 kA Heavy Pre-baking Aluminum Smelting Pot
浅析180 kA大型预焙铝电解槽低分子比下的热平衡特性与控制
13.
Optimized model and template for anode exchange sequence of prebaked anode cell
预焙槽阳极更换顺序表的优选模型和模板
14.
open prebaked anode type cell
敞开式预焙阳极电解槽
15.
Study on the Life of GL 190kA Prebaked Aluminum Reduction Cells;
GL190kA预焙铝电解槽槽寿命问题研究
16.
Research on Numerical Simulation of the Multi-field during Gas Preheating and Baking Process in the Drained Aluminum Reduction Cells;
导流型铝电解槽燃气预热焙烧过程中多场数值仿真研究
17.
Technique code for retrofitting soderberg cell into prebaked anode cell in aluminium smelters
自焙阳极铝电解槽预焙化改造技术规范
18.
The Development and Application of High-temperature Fume Preheating Technology on the 75kA Aluminum Reduction Cell;
高温烟气焙烧技术在75kA预焙槽上的开发应用