1.
The Calculation of the Instaneous Thickness of Cutting Chip on the Shearer Helical Drum
采煤机螺旋滚筒瞬时切屑厚度的计算
2.
The effects of different cutting thickness on surface quality and slice quality are studied in this paper.
研究了不同切削厚度对竹材表面质量与屑片质量的影响。
3.
half-and-half lap scarf
木材两端厚度各切一半
4.
Detection on the thickness of epidermis and dermis in psoriatic lesions with high resolution ultrasound
高分辨率超声检测斑块状银屑病表皮真皮厚度
5.
An Analysis of the Process of Axial Vibration Drilling and Chip Length
轴向振动钻削过程及其切屑长度分析
6.
(2) Cutting speed influents chip dimension.
(2)切削速度对切屑形状的尺寸大小有影响。
7.
The Influence Analysis on Micro Orthogonal Turn-Milling Cutting Speed to Chip Formation;
微小型正交车铣切削速度对切屑变形影响分析
8.
The Research of the Temperatare Distribution BetWeen chip and Tool with Armoured Electric Thermo-Corple
铠装热电偶测量刀—屑接触区切削温度分布方法
9.
Research on mechanism of chip formation in orthogonal turn-milling high strength steel
正交车铣高强度钢切屑形成机理的研究
10.
Research on Undeformed Chip Thickness and Unit Grinding Force during Surface Grinding of 55 Steel
55钢平面磨削中未变形磨屑厚度及单位磨削力的研究
11.
Influence of the Speed of "Quick Stoppage" on Chip Deformation in Metal-Cutting Experiment
金属切削实验中快速落刀速度对切屑变形的影响
12.
Analysis of the Tool-Chip Contact Length and the Cutting Force in the Microcutting Applying the Slip-Line Theory;
基于滑移线理论的微切削刀—屑接触长度和切削力研究
13.
Study on FE Simulation of Chip Formation and Temperature Field during High Speed Machining Hardened Steel;
高速切削淬硬钢切屑形成过程及温度场有限元模拟研究
14.
Research on Abrasive Water-jet Cutting Technology Concerning Heavy-section Materials
大厚度材料磨料水射流切割工艺研究
15.
The Optimized Research of Technics on Super-large Thickness Machining Technology of WEDM
超大厚度电火花线切割工艺优化研究
16.
Research on Super-large Thickness Machining Technology of WEDM;
电火花线切割超大厚度切割技术的研究
17.
The relationships between the cutting speed and a incised workpiece of intension, thickness are analyzed.
通过试验，分析了被切割工件强度和厚度与切割速度之间的关系。
18.
Remove all bone from the cuts and slice pieces into uniform thickness and size(approximately 3 inches thick).
把这些牛肉块去骨并将其切成统一的厚度和大小(约3英寸厚)。