1.
aperture atomizer
喷孔式喷油嘴喷雾器
2.
Technical specification for fuel injection nozzles of diesel engines
GB/T5772-1986柴油机喷油嘴偶件技术条件
3.
A Study on the Injection Fuel Nozzle Matching Experiment of 75 Diesel Engine Series;
75系列柴油机喷油嘴匹配试验研究
4.
A throttle is the part that controls the amount of gasoline injected by nozzles.
节汽门是一个能控制喷油嘴入喷油量的零件。
5.
Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles
缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究
6.
A Numerical Study on the Process of Cavitation in a Real Diesel Nozzle
柴油机喷油嘴喷孔中空泡形成过程的数值模拟
7.
Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes
625喷油嘴喷孔电火花加工专用机技术报告
8.
CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle
K系数喷油嘴喷孔内气液两相流动的三维模拟
9.
Three Dimensional Numerical Simulation of Flow Characteristic in Ultra-multi Hole Injector
超多喷孔喷油嘴流动特性的三维数值模拟
10.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
11.
Measures to extend life of mate of jet in diesel engine
延长柴油机喷油嘴偶件使用寿命的措施
12.
Finite Element Analysis on 3D Flow in the Nozzle and Shock Stress of the Needle in Diesel Engine Injector;
柴油机喷油嘴三维流场及针阀碰撞有限元分析
13.
The Numerical Simulation Study on Cavitation Flow in a Diesel Engine Injector Nozzle
柴油机喷油嘴内空穴流动数值模拟研究
14.
Structural optimization of injection nozzle for locomotive engine based on numerical simulation
基于数值模拟的机车柴油机喷油嘴的结构优化
15.
Effects of Diesel Nozzle Geometry on Internal Cavitating Flow
柴油机喷油嘴结构对内部空穴流动的影响分析
16.
Remove injector(s) from fuel rail.
从燃油轨道上拆卸喷嘴。
17.
Influences of Impingement Distance and Impingement Angles on Wall-Wetted Fuel Film
喷嘴距离和喷嘴角度对油膜附壁的影响
18.
ISA 1932 nozzle
ISA 1932喷嘴