1.
Effects of Die Leg on Welding Ability of Longitudinal Welds During Porthole Die Extrusion of Aluminum Profile
模桥结构对铝型材分流挤压纵向焊缝焊合性能的影响
2.
Theoretical Analysis on Squeeze Flow of Electrorheological Fluid between Two Parallel Disks;
电流变液平行圆盘挤压流的理论分析
3.
Analysis of squeeze flow of bi-viscosity fluid between two rigid spheres
两刚性圆球间双黏度流体挤压流动压力分析
4.
Research on CAD/CAE System for Porthole Extrusion Moulds of Hollow Aluminum Profiles;
空心铝型材分流组合挤压CAD/CAE研究
5.
Numerical Simulation of Metallic Flow Forming via Extrusion in Pocket and Porthole Dies
导流模和分流模金属挤压流动成形的数值模拟
6.
New Type Extruding Die Used Panel Separate Flow Die Guide Form Technology
应用平面分流模导流成形技术的新式挤压模
7.
FE Analysis of the Extrusion and Welding Process in Porthole Die for an Aluminum Alloy Square Tube
铝合金方管分流焊合挤压过程的有限元分析
8.
FEM Analysis in the Effect of Die Compression Section on Plastic Extrusion Flow
口模压缩段对塑料挤出流动影响的有限元分析
9.
Analyzing the Metal Moving and Designing the Mould in the Continuous Extrusion Extended Figuration;
连续挤压扩展成形金属流动分析与模具设计
10.
Development of CAD system of porthole extrusion die for hollow aluminum profiles
空心铝型材分流组合挤压模CAD系统开发
11.
Characteristics of Multi-directional Extrusion and the Analysis of Metal Flow for Three Links Components
多向挤压模具及三通件的成形流动分析
12.
Porthole die extrusion process numerical simulation and optimal die design
分流组合模挤压过程数值模拟及模具优化设计
13.
The Flow Pattern Analysis of Hot Extrusion Carbon Steel Pressure Reducing Valve Shell and Die Design
热挤压碳素钢减压器壳体流动成形分析及模具设计
14.
Microstructural Homogeneity in Hypereutectic High Cr Cast Iron by Semi-solid Rheo-extrusion
半固态流变挤压过共晶高铬铸铁组织均匀性分析
15.
Failure Mechanism Analysis of the Cold Extrusion Combination Concave Die and Numerical Simulation of the Extrusion Process
冷挤压组合凹模失效分析及挤压过程数值模拟
16.
Contrast analysis of extending forming between continuous extrusion and forward extrusion
连续挤压与正挤压在扩展成形中的对比分析
17.
dead metal zone
死(金属)区(挤压时模角处金属不能流动)
18.
When you close your hand and press, some of the water gets out.
当你把手握紧挤压时，会流出一些水。