1.
Technology of Ultrasonic Brazing of Aluminum by Sn-Zn Solders and Strengthening Mechanism of Joint
Sn-Zn钎料超声钎焊铝合金工艺及接头强化机制研究
2.
Heat Treatment Strengthening of Al─Li Alloy 2091 Welded Joint
2091铝锂合金焊接接头的热处理强化
3.
Ultrasoinc Nondestructive Characterization of Strength and Environmental Degradation of Adhesive Joints;
胶接接头强度及环境退化的超声波无损定征
4.
A Study on Strengthening Effects of Laser Peening on Stress Corrosion Cracking Resistance of Stainless Steel Welded Joints;
激光喷丸强化不锈钢焊接接头抗应力腐蚀研究
5.
Optimum design of undermatching butt joints with equal load-carrying ability under static load stress for high strength steel
高强钢低匹配静载等承载对接接头优化设计
6.
STUDY ON BRAZING PROCESS AND JOINT STRENGTH OF ALUMINAC CERAMICS
氧化铝陶瓷钎焊工艺与接头强度的研究
7.
Strength analysis and optimization design for wing joint based on ANSYS
基于ANSYS的机翼接头强度分析及优化设计
8.
Creep rupture and enhancement mechanism of Ag particle-enhancement composite solder joints
Ag颗粒增强复合钎料钎焊接头蠕变断裂及强化机理研究
9.
Failure Analysis and Technology Optimization of Fusion Weling Jiont of Electromotor Rotor Copper Ring;
电机转子紫铜环焊接接头失强破坏原因分析及工艺优化
10.
a Buna-N cable grommet or a strain relief fitting shall be provided in addition to the epoxy sealed leads.
除此之外,还应该配置丁纳橡胶-N电缆索环或应变消除接头,进一步强化环氧树脂密封接头。
11.
Strength Model and Optimal Design of The NiTiNb Shape Memory Alloy Connector System;
NiTiNb形状记忆合金管接头系统的强度模型及优化设计
12.
Analysis of Static Strength for Overlap Joint Plates and Others;
搭接焊接头搭板的静强度分析及其它
13.
Study on Fracture Behavior for Weld of High Strgenth Steel of 980MPa
980MPa高强钢焊接接头断裂行为研究
14.
Microstructure and mecharical properties of HAZ of 980 MPa high strength steel joints
980MPa级高强钢焊接接头HAZ的组织和性能
15.
The Strength and Loading Capacity of SSAW Pipe Welding Joint
螺旋焊管焊接接头的强度和承载能力
16.
Effect of Recessed Bonding on Stress Distribution and Strength of Adhesively Bonded Joints
间隙连接对胶接接头应力分布和强度的影响
17.
Study on Influence of Welding Process Parameters on Strength of Welded Joint
焊接工艺参数对焊接接头强度的影响研究
18.
Influences of adherent thickness,temperature and velocity on strength of adhesively-bonded single-lap joints
板厚、温度和速度对单搭接胶接接头强度的影响