1.
Analytical model of range-Doppler image of rotating cylinders and cones
转动圆柱和圆锥的激光距离多普勒像分析模型
2.
Approaching on Simplified Drawing Method for Intersecting Line of Cylinder and Cone
圆柱和圆锥正交相贯线的简化画法探讨
3.
Theoretical Calculation and Design for Cylindrical and Conical Bent Crystal Spectrograph
圆柱面和圆锥面弯晶谱仪的理论计算及设计
4.
tap with plain cylindrical pilot
带普通外圆导柱的丝锥
5.
double-reduction bevel-spur gear
双级圆锥-圆柱齿轮减速器
6.
a straight line that generates a cylinder or cone.
生成圆柱体或圆锥体的直线。
7.
Outspreading CAD of the Intersecting Curve of the Conical Sheet and Cylinder Based on VBA;
基于VBA的圆锥台与圆柱相贯展开CAD
8.
The Theoretical Modeling of a Cylinder Going Through a Cone and Their Intersecting Curve;
圆柱贯穿圆锥的相贯线及其数学模型
9.
The Settling Velocity Drag Coefficient and Reynolds Number of Sphere and Bob
球形和圆柱—圆锥形悬浮颗粒下沉速度、阻力系数和雷诺尔德数
10.
A beam of radiant energy in the form of a narrow cone or cylinder.
光线锥窄圆锥体或圆柱形的辐射性光束
11.
ckyclindrical gears and gear pairs
圆程齿轮和圆柱齿轮副
12.
The ortho cone helicoid was used interrsect intercept by the ortho cone helicoid and the cylinder.
正圆锥螺旋面是正圆柱螺旋面被同轴正圆锥面截得。
13.
A unified model was established for spur cylindrical gears, helical cylindrical gears, spur bevel gears and helical bevel gears.
建立了直齿圆柱齿轮、齿圆柱齿轮、齿圆锥齿轮、齿圆锥齿轮的统一模型。
14.
Any cone is a third part of the cylinder which has the same base with it and equal height.
任一（正）圆锥是与其同底等高圆柱的三分之一。
15.
Diffraction ray tracing of GTD on the cone and cylinder
圆锥体与圆柱体的几何绕射理论绕射线寻迹
16.
An Accurate Solution of the Furthest Right Point of the Pro-cut Line of Taper & Column;
圆锥、圆柱正交相贯线最右点的准确求法
17.
Discussing based on cutting method of conical cylinder with plane arc axes;
平面大圆弧轴线圆锥柱体切削机理研讨
18.
The Multi-aim Optimical Design for Conic-cylindrical Reducer;
圆锥—圆柱齿轮减速器的多目标优化设计