1.
Investigations on Web-Based Knowledge Base for High-Speed Machining Stability;
基于Web的高速切削稳定性知识库研究
2.
Study on Cutting Stability and Structural Design Method of High Speed Face Milling Cutter;
高速面铣刀切削稳定性及其结构化设计方法研究
3.
The stability and cutting forces in high speed milling process can be forecasted with the model.
利用该模型，可对铣削过程的特征参数如稳定性、切削力等进行预测。
4.
Dynamic Stability of Cutting Process Taking into Account Nonlinear Structural Stiffness of Machine Tool
机床结构刚度非线性条件下的切削过程动态稳定性研究
5.
Investigation of Thermal Stability, Microstructure as Well as Mechanical Property and Cutting Performance of Ti-Al-N Based Hard Coatings
Ti-Al-N基硬质涂层的热稳定性能、微结构及其力学、切削性能的研究
6.
Research on the Changes in Corneal Sensitivity and Tear Film Stability after LASIK Affected by Ablation Depth of Corneal Stroma;
角膜基质切削深度对LASIK术后角膜知觉及泪膜稳定性影响的研究
7.
Property: lt is white and harder and more brittle than A. lt features strong cutting force and steady chemical property and excellent insulation.
性能：白色，较棕刚玉硬而脆，切削力较强，化学稳定性好，具有很好的绝缘性。
8.
Property: It is white and harder and more brittle than A. It features strong cutting force and steady chemical property and execllent insulation.
白刚玉性能：白色，较棕刚玉硬而脆，切削力较强，化学稳定性好，具有很好的绝缘性。
9.
DYNAMIC STABILITY OF VARIABLE FEED CUTTING PROCESSES, BEING SERIES 3 IN "RELIABLE CHIP BREAKING METHODS APPLICABIE IN CUTTING DUCTILE MATERIALS
变进给切削过程的动态稳定性——关于韧性材料可靠断屑方法研究之三
10.
The Influence of Cutting Element Dimension,Linear Speed and Bit Load Stabilization on Chip Grain-Size and Effect of Rock Failure
切削具的线性尺寸、线速度、轴载的稳定性对岩屑粒度和破岩效率的影响
11.
The stability of the gage will be seriously impaired.
应变片的稳定性将被严重削弱。
12.
Stability Problem in Slope Cutting Work and Ecology Recovery Work;
削坡及生态恢复工程中的稳定性问题
13.
Stability Prediction for High-speed Milling of Thin Walled Structures and Experimental Validation
薄壁零件高速铣削稳定性预测与验证
14.
Semi-synthetic, biostable emulsion, containing mineral oil and EP additives.
半合成、生物稳定型切削液，含矿物基础油和极压添加剂。
15.
Stability Simulation and Finite Element Research on the Milling Process;
铣削加工过程的稳定性仿真及有限元研究
16.
Computerized Simulation and Experimental Study on the Stability of Milling Processes;
铣削加工过程稳定性计算机仿真及实验研究
17.
Three-dimensional Stability and Deformation of Thin-walled Part in High Speed End Milling
薄壁件高速铣削三维稳定性及加工变形研究
18.
NOVEL METHOD FOR DYNAMIC OPTIMIZATION OF STABILITY IN HIGH-SPEED MILLING SYSTEM
高速铣削系统稳定性动态优化新方法(英文)