1.
Remove Pinion Gear Thrust Washer
拆卸主动齿轮止推垫圈
2.
The end of the va|ve is double-metal stopping shims of high efficiency.
阀门底端采用双金属止推垫片，止推性能优良。
3.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
4.
Plain bearings-Ring type thrust washers made from strip-Dimensions and tolerances
GB/T10446-1989滑动轴承整圆止推垫圈尺寸和公差
5.
Plain bearings-Pressed bimetallic half thrust washers -Features and tolerances
GB/T10447-1989滑动轴承半圆止推垫圈要素和公差
6.
Provide non-standardized products：Cylindrical bushes, flanged bushes, thrust washers, flat strip material, half bearing, wear plate.
可供非标产品：直套、翻边轴套，止推垫片、板材、轴瓦、滑板。
7.
Study on Dynamic Characteristics of Compound Planetary Gear and Wear Mechanism of Its Thrust Washer
复式行星排动力特性及其止推垫圈磨损特性研究
8.
Tab washers with long tab
GB/T854-1988单耳止动垫圈
9.
Tab washers with long tab and wing
GB/T855-1988双耳止动垫圈
10.
External tab washers
GB/T856-1988外舌止动垫圈
11.
friction washer
摩擦垫圈（起止动作用）
12.
pivot bearing
【机】立式止推轴承
13.
The primary function of sealing gasket is to prevent gas from leakage.
密封垫圈的主要作用是防止气体泄漏。
14.
Washers are often used to prevent loosening and crushing.
垫圈往往用来防止松脱和挤压。
15.
Lock washers with angular upturn tab in line to the external tab
GB/T1024-1976角形外舌止动垫圈
16.
Lock washers with angular upturn tab perpendicular to the lug
GB/T1021-1976角形垂直单耳止动垫圈
17.
Lock washers with angular upturn tab in line to the lug
GB/T1022-1976角形单耳止动垫圈
18.
Tab washers for round nut
GB/T858-1988圆螺母用止动垫圈