1.
automatic headstock changing N/C machine
![点击朗读](/dictall/images/read.gif)
自动更换主轴箱数控机床
2.
Many bearing difficulties can be taken care of by this method of bearing replacement.
![点击朗读](/dictall/images/read.gif)
许多轴承故障能够通过更换主轴承或轴承来解决。
3.
The method of changing main-spindle is used in CNC router and automatic tools changer with tools magazine is used in C NC processing center.
数控镂铣机采用更换主轴头换刀方式;而数控加工中心采用带刀库的自动换刀系统进行换刀。
4.
Replacement inside the Tunnel and Failure Analysis of Sealing of TBM Main Bearing
![点击朗读](/dictall/images/read.gif)
TBM主轴承内密封洞内更换及失效分析
5.
Replace crankshaft or grind journals
![点击朗读](/dictall/images/read.gif)
更换曲轴或磨光轴颈
6.
Replacing precision-insert main bearings without removing the crankshaft requires about 5 hours. Removing and replacing the crankshaft requires several additional hours.
不拆曲轴更换精密嵌入型主轴承,大约需要5小时,拆卸和更换轴承要额外增加几小时。
7.
To perform the complete replacement job on semifinished main bearings requires about 19 to 22 hours.
完成更换半精加工主轴承的工作需要19~20小时
8.
Replacement and Treatment of the Main Bearing for the Gripper TBM during Driving
![点击朗读](/dictall/images/read.gif)
支撑式TBM掘进中途的主轴承更换及处理
9.
bearing cone replacing tool
![点击朗读](/dictall/images/read.gif)
锥形轴承内圈更换工具
10.
Replace worn or scored yoke and seal.
![点击朗读](/dictall/images/read.gif)
更换磨损或划伤的轴轭。
11.
Replacing the camshaft requires about eight hours; four additional hours are required for replacing camshaft bearings.
更换凸轮轴需要8小时左右;更换凸轮轴轴承需要额外增加4小时。
12.
Most modern automotive engines have precision-insert-type. main bearings which can be replaced without removing the crankshaft.
大多数现代汽车发动机的主轴承是精密嵌入型,不必拆下曲轴即可更换。
13.
renew worn tyres, bearings, brake-blocks, etc
![点击朗读](/dictall/images/read.gif)
更换磨损的轮胎、 轴承、 闸瓦等
14.
Replace the front strut upper mount and bearing
![点击朗读](/dictall/images/read.gif)
更换前支柱上固定座与轴承
15.
Discussion on the replacement of the ESP ceramic shaft in operation method
![点击朗读](/dictall/images/read.gif)
运行中更换电除尘器瓷转轴方法探讨
16.
REPLACE HE BODY CONTROL MODUL
![点击朗读](/dictall/images/read.gif)
更换主体控制模组。*
17.
REPAIR AS NECESSARY, REPLACE THE ABS MAIN FUSE.
![点击朗读](/dictall/images/read.gif)
必要的话,更换ABS主熔丝。*
18.
The Automatic Switching Between the Main Spindle and C Axis of the Vertical Turning and Milling MC
立式车铣加工中心主轴与C轴的自动切换控制