1.
Determination of effective depth of hardening after induction or flame hardening of steel
GB/T5617-1985钢的感应淬火或火焰淬火后有效硬化层深度的测定
2.
and with constant working current,the lower scanning speed,the deeper harden layer depth and the higher hardness.
工作电流不变,扫描速度越低,硬化层深度越深、硬度越高。
3.
Finite Element Simulation of the Transient Temperature Field During Laser Surface Quenching and Forecasted Depth of the Hardness Layer;
激光表面淬火瞬态温度场的有限元模拟及硬化层深预测
4.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
5.
Microstructure and Depth of Harden Layer of 40Cr Steel Melting Treated with Different Lasers
不同激光器熔凝处理40Cr钢硬化层的显微组织及深度
6.
(3) The deep dural layer of the clinoid space is not integral in 15.63?of the 32 CSs.
(3)床突间隙的深层硬膜有15.63?不完整。
7.
Viewing from the third dimension of deep, the acupoint can be divided into three layers, i. e. shallow, middle and deep. Each layer has its different function and needling sensation.
从深度的第三维看,腧穴分成浅中深三层,每层有不同的功效,每层都可得气。
8.
Online ENDT for hardness depth of iron and steel parts based on Online LS-SVM
基于Online LS-SVM的钢铁件淬硬层深度在线检测
9.
An equivalent mass source method for internal waves generated by a body moving in a stratified fluid of finite depth
有限深密度分层流体中运动物体生成内波的一种等效质量源方法
10.
Deepening the Reform in Personnel System and Developing the Human Resources in Colleges and Universities;
深化人事制度改革 有效开发高校人力资源
11.
The lack of deep hardening in these alloys negates their use.
这些合金缺乏深层硬化能力使它们无法利用。
12.
A Study of Micro-hardness of Fe-Zn Alloy Obtained by Electroless Plating
化学镀Fe-Zn镀层的显微硬度实验研究
13.
There are a lot of methods for measuring nitriding depth, incluing structural corrosion method.
现有的测量氮化层深度的方法很多，国内大多数采用组织腐蚀法。
14.
Effects of Different Atmospheres on The Thickness And Hardness of Strenghened Coating;
环境介质对脉冲放电强化层厚度和硬度的影响
15.
Effect of hardening depth on wheel rail contact stress of port crane
硬化深度对港口起重机车轮接触应力的影响
16.
Effects of Silicon Carbide on the Cure Depth,Hardness and Compressive Strength of Composite Resin
碳化硅对复合树脂固化深度、硬度和压缩强度的影响
17.
This has been implications for the speification of case depth for gears.
这一情况已影响到齿轮硬层深度技术条件的确定。
18.
Design and Implementation of Hidden Surface Removal Hardware Based on Cache and Hierarchical Z-Buffer Algorithm for 3D Graphics
基于Cache和层次Z缓存算法的3维图形深度消隐硬件设计和实现