1.
automatic high speed refrigerated centrifuge
自动高速冷却离心机
2.
"The furnace is equipped with a high efficiency compact spray cooling device with high cooling capacity, high cooling rate and good uniformity, by which the length of the cooling zone is reduced. "
采用高效紧凑式喷射冷却装置,冷却能力大,速度快,冷却均匀,大大缩短了冷却段的长度
3.
Optimization for Control-Cooling Process of High Speed Rolled Wire of Steel 82A
82A钢高速线材控制冷却工艺的优化
4.
The strip is cooled from heat treatment temperature to around 480 c with high efficiency spray cooling device quickly.
利用高效喷射冷却装置快速地将带钢从热处理温度冷却至480℃左右。
5.
Analysis of Engine Combustion Chambers for Cooling Performance under the Conditions of High Altitude and Low Velocity
某型发动机高空、低速下燃烧室冷却性能分析
6.
Study on Ti6Al4V High-speed Machining Mechanism under Different Cooling Conditions
不同冷却润滑条件Ti6Al4V高速加工机理研究
7.
The Design Gas Velocity Confirmed in the Cooler of High Temperature Gas
某高温燃气冷却器设计燃气流速的确定
8.
A Kind of Laminar Flow Cooling Strategy with High Response and Steady Precision for the Hot Strip Rolling
一种快速高精度热轧带钢层流冷却控制策略
9.
Effect of cooling rate on solidification structure in high temperature brittle zone of 1Cr18Ni9Ti steel
冷却速率对1Cr18Ni9Ti钢高温脆性区凝固组织的影响
10.
Practice and Analysis of Tube Sheet Hardling with High-speed Internal Cooling Shallow Boring
高速内冷却浅孔钻加工管板实践与分析
11.
Effect of cooling rate on microstructure transformation in 30CrNi3MoV ultra-high strength steel
冷却速度对30CrNi3MoV超高强钢组织转变的影响
12.
critical cooling rate
马氏体临界冷却速度
13.
dynamic hardening
快速加热冷却淬火法
14.
Transmission-oil cooler
自动变速箱油冷却器
15.
Structure optimization of water cooling channel of cast steel stave
高炉铸钢冷却壁冷却水管的优化研究
16.
The Analysis on Control Strategy of Cooling Rate for Plate Accelerated Cooling
中厚板轧后冷却冷速控制策略的分析
17.
The use of coolant for rotary joints under high-speed operation is particularly difficult.
冷却剂为了旋转接合尤其在高速条件下运用是非常特殊困难的。
18.
Application of Morgan cold controlling techique in High Speed Wire Rod Mill of Tiangang
摩根控制冷却技术在天钢高速线材轧机中的应用