1.
Study on Influence of Welding Process Parameters on Strength of Welded Joint
焊接工艺参数对焊接接头强度的影响研究
2.
Study on Strength Mismatching Welded Joints Based on Geometry Constraint and Its Application
基于约束效应的焊接接头强度失配的研究及应用
3.
The Strength and Loading Capacity of SSAW Pipe Welding Joint
螺旋焊管焊接接头的强度和承载能力
4.
Affect of Different Solder on Intension of Cu/W Brazing Joint
不同焊料对Cu/W钎焊接头强度的影响
5.
Analysis of Static Strength for Overlap Joint Plates and Others;
搭接焊接头搭板的静强度分析及其它
6.
The Deformation Behaviors and the Strength of Welded Joints with Mechanical Properties Mismatch;
力学性能失配焊接接头的强度及变形行为
7.
Research on Fracture Behavior of Ultra-High Strength Steel and Welded Joint
超高强度钢及其焊接接头的断裂行为研究
8.
Numerical Simulation of T-welding Residual Stress and Strength Analysis
T型接头焊接残余应力数值模拟及强度分析
9.
Fatigue performance of weld joint for high strength bridge steel
高强度桥梁钢焊接接头疲劳性能的研究
10.
Influence of Interlayer's Thickness on Strength of HIP Diffusion Bonding Joints Between P/M TC4 Alloy and GCr15 Bearing Steel
中间层厚度对P/M TC4-GCr15扩散焊接头强度的影响
11.
STUDY ON BRAZING PROCESS AND JOINT STRENGTH OF ALUMINAC CERAMICS
氧化铝陶瓷钎焊工艺与接头强度的研究
12.
The Research of Producing and Test of Jointing Intensity of Small Caliber PDC Bit;
小口径PDC钻头制造与焊接强度检测研究
13.
Study on the Toughness of High Strength Low Alloy Structural Steels and the Weld Joints
低合金高强度结构钢及其焊接头的韧性研究
14.
Interface structure and strength analysis of brazed GH3044 nickel-based alloy joint
GH3044镍基合金钎焊接头的界面组织和强度分析
15.
A Method of Improving Brazing Joint Strength of Plated Ceramic to Metal
提高复合电镀陶瓷与金属钎焊接头强度的方法
16.
Microstructure and property of spot welded joint of ultra-high strength steel and micro-alloy steel
超高强度钢与微合金钢点焊接头的组织与性能
17.
Heat Treatment Strengthening of Al─Li Alloy 2091 Welded Joint
2091铝锂合金焊接接头的热处理强化
18.
Study on Fracture Behavior for Weld of High Strgenth Steel of 980MPa
980MPa高强钢焊接接头断裂行为研究