1.
Research development and analysis of the key technologies of micro deep holes machining
微细深孔加工研究进展及关键技术分析
2.
Study on the Technology of Inner Surface Inspection for Curved Micro-Pipe Based on Digital Image Processing;
基于图像的曲线型微细深孔及管路的内轮廓三维检测技术研究
3.
Study on Micro Hole Drilling with High Aspect Ratio by Micro EDM
大深径比微细孔电火花加工技术研究
4.
Research on Deep Small Hole Machining Based on Analysis of Flow Field
基于流场分析的微细电火花深小孔加工的研究
5.
Fabricating Electrode by Electrodepositing Technology and Its Application in Micro-EDM Deep Hole Drilling
电极的电沉积制备技术及其在微细电火花深孔加工中的应用
6.
Rapid EDM systems for micro and small holes with high-aspect-ratio
大深径比微小孔快速电火花加工系统
7.
Advanced Drilling Technology of Micro-Via in PCB
印制电路板超细微钻孔先进加工技术
8.
Experimental Research of Micro-EDM for Through-Silicon-Via
硅阵列通孔微细电火花加工试验研究
9.
ENGINEERING PRACTICE AND NUMERICAL SIMULATION ON THE MILLISECOND BLASTING FOR DITCHING DEEP BORE HOLES
沟槽深孔微差爆破的工程实践和数值模拟
10.
INVESTIGATION OF THE REASONABLE TIME INTERVAL FOR LONG HOLE MILLISECOND BLASTING OF TUNG ANSHAN IRON MINE
东鞍山铁矿深孔爆破合理微差间隔时间的研究
11.
Research on the Deep Micro Holes Machining by EDM with USM in Inverted Layout
倒置式电火花超声复合加工深微孔的研究
12.
INFLUENCE OF DEEP-HOLE CONTROLLED PRE-CRACKING EXPLOSION ON MICROSTRUCTURE OF COAL
深孔控制预裂爆破对煤体微观结构的影响
13.
Applying of Ultrasonic Vibration Drilling on Micro and Small Hole Machining
振动钻削技术在深小微孔加工中的应用
14.
Elimination of Burning-on in Blind and Tenuous Hole in Negative Pressure Lost Foam Casting
消失模铸造中盲孔及细深孔粘砂问题的解决途径
15.
Only micronic particulates penetrate to the depth of the lung.
只有微细粒子穿透到肺深部。
16.
A small variation, gradation, or difference.
细微差别小的变化、颜色深浅或不同
17.
Preparation of Laser Micropore Porcine Acellular Dermal Matrix and Its Application;
激光微孔异种（猪）脱细胞真皮基质的研制与应用
18.
Study on the Biocompatible Interface of Human Hepatocytes/Microporous Polypropylene Ultrafiltration Membrane;
人肝细胞/微孔聚丙烯生物杂化界面构建的研究