1.
Fabrication of metal micro-precision sieves with high open areas using UV-LIGA process
用UV-LIGA技术制造大通孔率精细镍网(英文)
2.
Rising temperature of casting solution will increase the water flux, porosity and average pore size of PVDF membrane.
制膜液温度升高，得到微孔膜的孔隙率、通量及平均孔径都增大。
3.
The study result was verified by porosity testing.
分析结论通过孔隙率检验得以证实。
4.
It is the porosity due to interconnected pores that can be filled with and emptied of water.
这种孔隙率是水可流出和流入的连通空隙。
5.
The Research of n-HAP/PDLLA Composite Scaffolds with Well Interconnected Pores and High Porosity
高孔隙率、高连通性n-HAP/PDLLA复合支架材料研究
6.
Analysis of the Influence of Stress Induced by Cu Via on CMOS Mobility
Cu通孔诱导的应力对CMOS迁移率影响分析
7.
In general, smaller grain size and greater angularity tend to increase the porosity while an increase in range of particle size tends to decrease porosity.
通常，颗粒越小曲率越大孔隙度越大，而当颗粒尺寸增大时孔隙度会减
8.
The target of optimization is to increase the 11tilization of routing resources, to reduce the height of channel and to cutclown the number of vias so that the global performance could be improved.
算法以提高布线区利用率、减小通道高度和减少通孔数为目标，实现总体性能的优化。
9.
Based on the principle, the preventive scheme was put forward by stage and combining water infusion with grouting.
给出了该条件下增加煤体孔隙率，减少瓦斯、空气流通通道的防治原则。
10.
Cupric Sulfate Plating Process Cu-BRITE TFⅡ for Through-Hole and Via Filling Plating
导通孔和通孔填孔镀用的CuSO_4电镀工艺“Cu-BRITE TFⅡ”
11.
The air passage is called the air bleed.
空气通道叫通气孔。
12.
resistivity-porosity cross plotting
电阻率-孔隙度交绘图法
13.
Antenna efficiency of an aperture-type antenna
孔径型天线的天线效率
14.
Internal friction behaviors of porous NiTi alloys with variable porosities
可变孔隙率多孔NiTi合金的内耗行为
15.
TESTING OF OPEN POROSITY AND COLSED POROSITY OF CARBON MATERIAL BY EFFECTIVE DENSITY METHOD
炭素材料显气孔率和闭孔率的测试──有效密度法
16.
Effects of Water Absorption and Porosity of ZrO_2 on Cordierite Porous Ceramic
ZrO_2对堇青石多孔陶瓷吸水率和显气孔率的影响
17.
By correctly sizing the cavity and aperture, the device can be made series resonant at any desired frequency.
通过适当选择空腔和入口孔的尺寸，可保证在要求的频率下获得共振状态。
18.
This distributor use small space. has more distribute hole, little gas resistance, low pressure drop, wide operation flexibility.
该气液分布器空间占位更低，气体通道开孔率更大，气流阻力小，压降低，操作弹性范围大。