1.
The resreach progress of pellet burning equipments
生物质颗粒燃料燃烧设备的研究进展
2.
Development and Test Study on Biomass (Straw) Briquettes Combution Equipment;
生物质（秸秆）成型燃料燃烧设备研制及试验研究
3.
Application of Network Plan in 300 MW Boiler Combustion Equipment Manufacture;
网络计划在300MW锅炉燃烧设备生产中的应用
4.
Research Develop about the Good Water Coal Mixtures and the Technique Reformation in Burnable Equipments
优质水煤浆的研发与燃烧设备的技术改造
5.
Research and Application of the Coal Fired Boiler Clean-Combustion Technology Equipment;
燃煤锅炉清洁燃烧技术设备的研究与应用
6.
Development of Hydriding Combustion Synthesis Reaction Apparatus and the Preparation of Mg-Based Hydrogen Storage Alloy-Mg_2NiH_4;
氢化燃烧合成设备研制及镁基储氢合金Mg_2NiH_4制备
7.
A failure in a device attributable to burning, excessive heat, or friction.
烧毁，烧坏由于燃烧、超高热或摩擦引起的设备故障
8.
Application of Virtual instrument in High Temperature Air Combustion Research;
虚拟设备在高温空气燃烧研究中的应用
9.
Improving Measures for Supply Fuel System in Combustion Chamber of Asphalt Concrete Plant
沥青混凝土搅拌设备燃烧器供油系统改进措施
10.
A device for augmenting the thrust of a jet engine by burning additional fuel with the uncombined oxygen in the hot exhaust gases.
加力燃烧室通过燃烧热废气中所含的分离氧和附加燃料以增加喷气发动机推力的设备
11.
Preparation of LiMn_2O_4 by Low Temperature Molten-Combustion Method
低温熔盐燃烧法制备LiMn_2O_4
12.
The Effect of Asphalt Concrete Stirring Equipment Atomizer and Oil Pressure on the Burner Technology
沥青混凝土拌和设备雾化器、供油压力对燃烧器技术性能的影响
13.
Application of Information Fusion Technology to Failure Diagnosis for Burner System of Asphalt Mixing Equipment
信息融合技术在沥青搅拌设备燃烧系统故障诊断中的应用
14.
Recently, the university spent 30,000 dollars to change some of the equipment so it could burn both animal fats and tradition fuels.
最近，学校花了30000美金改造设备以便能够既烧动物脂肪也能烧传统的燃料。
15.
Design and development test of a heavy-duty gas turbine combustor
重型燃气轮机燃烧室设计与试验研究
16.
"Figure 41 is a safety relief valve for steam service on unfired pressure vessels. It is also used on accumulators, cleaners and distillers."
型号41安全阀适用于非燃烧式压力容器的蒸汽系统,也适用于蓄能设备、洗衣店和蒸馏设备。
17.
Development and Application of Ceramics Industry Heat Equipment CAD System(Ⅴ) --Design of combustion facilities and flue passage
陶瓷工业热工设备CAD系统开发及应用(Ⅴ)——燃烧与排烟通风设置设计计算
18.
Combustion Synthesis Preparation and Characterization of Mg/Mg_2Si Composite Material;
燃烧合成制备Mg/Mg_2Si复合材料及其表征