1.
Study on Thermal Treatment of Hazardous Wastes in Rotary Kilns;
典型危险废物回转窑热处置特性和技术研究
2.
expanding plant, for cork based on heat treatment
以热处理为基础的软木膨胀装置
3.
microprocessor controlled bonder
微处理曝制的热压焊装置
4.
Optimizing tube furnace operation to improve delayed-coking unit handling capacity;
优化加热炉操作,扩大焦化装置处理量
5.
Research on thermoplastic properties of Ti600 alloy hydrogenated
Ti600合金置氢处理后热塑性研究
6.
Do not install the connection box in locations subject to high temperatures, in locations subject to direct sunlight, warm air from heater outlets, or other locations that can get hot.
不要在高温处,阳光直射位置,受加热器出口热空气侵袭或其它受热位置安装连接盒。
7.
Study on disposal pit space for high-level radioactive waste in thermal-mechanical coupling conditiion
热-力耦合条件下高放废物处置室间距研究
8.
Start-up Fault Analysis of High Power Hot Water Pump in LDPE Plant
高压聚乙烯装置大功率热水泵启动故障处理
9.
Application of JAF-40 Type Fluidics Air Floating Device to Hot Rolling Water Treatment
JAF-40型射流气浮装置在热轧水处理中的应用
10.
COUPLED THERMO-MECHANICAL ANALYSIS OF GRANITE FOR HIGH-LEVEL RADIOACTIVE WASTE REPOSITORY
高放废物处置库花岗岩热-力耦合模拟研究
11.
EFFECT OF CATHETER WARM-UP SOFTENING MANAGEMENT IN EPIDURAL CATHETER INTUBATION
导管预热软化处理在硬膜外腔置管中的作用
12.
The heated-air system provides rapid heating of the air entering the carburetor when the engine is cold.
发动机处于冷态时，预热空气装置能迅速提供热的空气进入化油器。
13.
Cold fresh water and hot fresh water or means of heating watershall be available in all com munal wash places.
应在所有公共冲洗处所设置冷淡水和热淡水或水加热设备。
14.
HEATING EQUIPMENT AND ELECTRODE DESIGN FOR MID-TEMPERATURE HEAT TREATMENT FURNACE WITH FLUIDIZED GRAPHITE BED
中温石墨流态床热处理炉的加热装置与电极设计
15.
The Pipe Heat Recovery Device for 20T milk/D Spray drying Tomer
20吨/日处理鲜奶喷雾干燥塔热管式余热回收装置
16.
Heat pump:Device for transferring heat from a substance or space at one temperature to another at a higher temperature.
热泵:将处于某一温度的物体或空间的热量,转移到处于较高温度的另一物体或空间的装置。
17.
Hot-rolled surface, annealed and pickled, can be used as cold-rolling material, industial tanks and chem i cal devices.
热轧后施以热处理及酸洗处理的表面。一般用于冷轧材料，工业用槽罐、学工业装置等。
18.
The strip is cooled from heat treatment temperature to around 480 c with high efficiency spray cooling device quickly.
利用高效喷射冷却装置快速地将带钢从热处理温度冷却至480℃左右。