1.
Will their rate of attrition when very long be as slow as seen in telomerase-negative mouse cells?
当端粒很长时，它们的磨损速率将像我们在端粒酶负鼠细胞中所看到的那样慢吗？
2.
Micro-wear test of soft materials(Ⅰ)--Wear scar measurement and wear rate calculation
软材料的微磨损测试研究(Ⅰ)——磨痕测量与磨损率计算
3.
"Although the vehicle has less "pep"in overdrive, there is less engine and accessory wear during overdrive operation."
虽然汽车在超速档时,后备功率较小,但是对发动机和配件的磨损也较少。
4.
Research on Accelerated Wear Mechanism for 3Cr13 Sprayed Coating Under Abrasive Particles Lubrication
含磨粒润滑条件下3Cr13涂层加速磨损机理研究
5.
Research on the influence of packing fraction and rotation rate on the power of ball mill
填充率与转速率对球磨机功率影响的研究
6.
Determination of Muzzle Velocity Loss by Law of Bore Wear
由炮膛磨损规律确定火炮初速减退量
7.
Composite Surface Strengthening of 40CrNiMoA Steel and Property of High Speed Abrasion;
40CrNiMoA复合表面强化及高速磨损性能
8.
Study on Fractal Prediction of Gear Wear;
汽车变速箱齿轮磨损的分形预测研究
9.
The Reasons for Wear and Tear of Bearings in Deceleration Devices Used in Coal Mines and Relevant Countermeasure;
煤矿减速器轴承位磨损的原因及对策
10.
Study on the Tool Wear Mechanism and Tool Life for High-Speed Milling Titanium Alloy Ti6Al4V
高速铣削钛合金Ti6Al4V的刀具磨损研究
11.
Research on gear′s fretting in wind power station
风电系统中加速齿轮的微动磨损研究
12.
Application of Electrical Technology to Monitor the Ball Milling Process and reduce the Rate of Wear of the grinding Media
应用电技术监控球磨过程并减小磨矿介质的磨损速度
13.
Preliminary Study on Wear Characteristics and Wear Process Simulation of Grinding Roll in MPS-190 Type Medium Speed Mill
MPS-190型中速磨煤机磨辊磨损特性及过程仿真的初步研究
14.
The results show that the abrasion of coatings was influenced by many factors, such as attack angle, impact speed, and abradant dosage etc.
结果表明 :涂层的冲蚀磨损受到攻角、冲速、磨料量等多种因素的影响。
15.
Abrasive Wear Resistance of HVOF Sprayed Cr_3C_2-NiCr Coatings with Different Parameters
不同参数下超音速火焰喷涂Cr_3C_2-NiCr涂层磨粒磨损性能
16.
Well, the speedometer is worn out. We have to put in a new one .
嗯，速度计磨损了。 我们得装上一只新的上去。
17.
Well, the speedometer be worm out. We have to put in a new one.
嗯，速度计磨损了。我们得装上一只新的上去。
18.
The slow speed reduces mechanical wear effect in the agitating process.
慢速旋转将减少在搅拌过程中机器的磨损效应。