1.
Study on the Plastic Deformation Behaviors of 7075z Aluminum Alloy at High Temperatures;
7075z铝合金高温塑性变形行为研究
2.
Flow Stress of 7050 High Strength Aluminum Alloy during High Temperature Plastic Deformation
7050高强铝合金高温塑性变形的流变应力研究
3.
Study on Flow Stress Behavior of TA15 Titanium Alloy during High Temperature Plastic Deformation
TA15钛合金高温塑性变形流变应力行为研究
4.
Study on the Plastic Deformation Behaviors of Al-8.4Zn-2.2Mg-2.4Cu Alloy at Elevated Temperatue;
Al-8.4Zn-2.2Mg-2.4Cu合金高温塑性变形行为的研究
5.
Research on Hot Deformation Behavior of Nodular Cast Iron and Its Application
球墨铸铁高温塑性变形行为研究及其应用
6.
Hot plastic deformation and processing maps of 14Co-10Ni-Fe alloy
Fe-14Co-10Ni合金的高温塑性变形及热加工图
7.
Non-equilibrium grain boundary segregation of phosphorous during high temperature plastic deformation
高温塑性变形引起的P非平衡晶界偏聚
8.
06Cr13 Plastic Deformation Characteristics in High-temperature and Microstructure Analysis under Different Quenching Temperature
06Cr13高温塑性变形特性和不同淬火温度下的组织分析
9.
The flow stress can be described by temperature-compensated strain rate, the so-called Zener-Hollomon parameter.
3．利用7055铝合金高温塑性变形时稳态流变应力σ、应变速率(?)
10.
Investigation on Oxidation Mechanism of Ag-Sn Alloy and High Temperature Plastic Deformation Behaviour of Ag-SnO_2 Materials
Ag-Sn合金氧化机理与Ag-SnO_2材料的高温塑性变形行为研究
11.
Processing Maps of Hot Plastic Deformation for In-Situ Synthesis of TiB_2/6351 Composite
原位合成TiB_2/6351复合材料高温塑性变形行为的加工图
12.
EBSD ANALYSES OF THE MICROSTRUCTURAL EVOLUTION AND CSL CHARACTERISTIC GRAIN BOUNDARY OF COARSE-GRAINED NiAl ALLOY DURING PLASTIC DEFORMATION
EBSD技术分析大晶粒NiAl合金高温塑性变形组织演变与CSL特征晶界分布
13.
Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation
GH4145高温合金热塑性变形流变应力研究
14.
Research on Testing Elastic-Plasitc Fatigue-Thermal Deformation Around the Hole
孔周高温弹塑性疲劳变形的检测研究
15.
Study on Superplastic Deformation of Superalloy GH4169
GH4169高温合金的超塑性变形研究
16.
The Influence of Deformation Temperature on The Superplasticity of High Carbin Steel Containing Cr and Si
形变温度对高碳铬硅钢超塑性能的影响
17.
" Rubber, Vulcanized or thermoplastic Determination of compression set at ambient elevated or low temperatures"
GB/T7759-1996硫化橡胶、热塑性橡胶常温、高温和低温下压缩永久变形测定
18.
Effect of Deformation Temperature on the Superplasicity of Titanium Alloy TC11
变形温度对TC11钛合金超塑性的影响