1.
Control of Oxygen Content in 20CrMnTiH Gear Steel
20CrMnTiH齿轮钢中氧含量控制
2.
DISCUSSION ABOUT HOW TO IMPROVE THE ACCURACY OF DETERMINATION OF OXYGEN AND NITROGEN IN STEEL
提高钢中氧氮分析准确度方法的探讨
3.
Effect of Aluminum Content on the Microstructure and Oxides in Titanium Micro-alloyed Steel
铝含量对含钛钢中氧化物及凝固组织的影响
4.
dead-melted steel
镇静钢, 全脱氧钢
5.
APPLICATION OF ?168 CYCLONE-LANCE NOZZLE IN BOF STEELMAKING
φ168旋流氧枪喷头在转炉炼钢中的应用
6.
Thermal Shock Behavior of Mg-PSZ Tube for Monitoring Oxygen Dissolved in Molten Steels;
钢水定氧中Mg-PSZ管的抗热震性研究
7.
Effects of Oxygen Contents in Copper on the Diffusion Bonding Interface of Copper/Steel;
铜中的氧对铜/钢扩散复合界面的影响
8.
Variation of total oxygen in RH refining and operation improvement
RH精炼钢中全氧量变化与操作改进
9.
Total oxygen content control of ULC steel in the process of RH treatment
RH处理超低碳钢中总氧含量的控制
10.
A Model for Predicting the Total Oxygen of Steel in the Process of RH Treatment
RH处理超低碳钢中总氧含量预报模型
11.
Effect of Dissolved Oxygen on Corrosion of 20R Steel in Bio-diesel Reactor Raw Mixture
生物柴油原料中溶解氧对20R钢的腐蚀
12.
The Arrester of Oxygen Lance System’s Falling
浅谈转炉炼钢生产中的氧枪防坠装置
13.
In the case of rimming steel, no or some deoxidation is carried out before casting. During the solidification in the mould carbon monoxide is formed and the gas makes the steel boils.
沸腾钢在铸锭前不脱氧或轻度脱氧。在锭模中凝固的过程中产生的一氧化碳气体使钢液沸腾。
14.
non-scaling steel
不起氧化皮的钢, 不锈钢
15.
Some CO gas remains in the ingot, and eventually blow holes are formed in the steel.
部分一氧化碳气体残留在钢锭内部，最终在钢中形成气泡。
16.
The steel in the ladle is deoxidised by adding aluminium, ferro-silicon or ferro-manganese.
钢水包中的钢水还要加进铝、铁和锰铁等进行脱氧。
17.
Thermodynamic Calculation and MnS Solubility of Mn-Ti Oxide Formation in Si-Mn-Ti Deoxided Steel
硅锰钛脱氧钢中锰钛氧化物夹杂的热力学计算以及MnS的溶解度
18.
Determination of trace oxygen in wheel axle steel by pulse infrared method after pretreatment with oxalic acid-hydrogen peroxide
过氧化氢-草酸预处理脉冲红外法测定轮轴钢中痕量氧