1.
testing methods for strength properties of adhesives in shear by compression loading
胶粘剂压缩剪切强度试验方法
2.
Testing method for compressive shear strength of dowel joint by inorganic adhesives
GB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法
3.
Adhesives-Wood to wood adhesive bonds-Determination of shear strength by compression loading
GB/T17517-1998胶粘剂压缩剪切强度试验方法木材与木材
4.
Three-parameter Generalized Failure Criteria Based on Tension,Compression and Shear Uniaxial Strength
基于拉伸、压缩、剪切单轴强度试验值的材料三参数广义强度准则
5.
EXPERIMENTAL RESEARCH ON BASIC MECHANICAL PROPERTIES OF GFRP BARS
玻璃纤维增强聚合物筋压缩和剪切性能试验研究
6.
testing methods for shear strength of plastics by punch tool
塑料剪切强度试验方法
7.
uniform strain shearing strengh tester
等应变剪切强度测试仪
8.
Test method for the punch-type of strength of glass fiber-reinforced plastics
GB/T1450.2-1983玻璃纤维增强塑料冲压式剪切强度试验方法
9.
Shear Band of Compression Sample of Alloy BT16 after Hydrogenation
BT16钛合金渗氢压缩试样中的剪切带
10.
An analysis of transition coherent structuresin convective Mach Number 0.4 compressible free shear flow
可压缩自由剪切流混合转捩大涡模拟
11.
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
12.
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
13.
Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side of the tape)
GB/T7754-1987压敏胶粘带剪切强度试验方法(胶面对背面)
14.
Artificial Neural Network Prediction of Effect of Voids on the Interlaminar Shear Strength of Carbon/epoxy Fabric Laminates
孔隙对碳/环氧层压板层间剪切强度影响的神经网络预测(英文)
15.
The Shear Compression Failure of TC4 Titanium Alloy at Different Temperatures
TC4钛合金在不同温度下的剪压缩失效
16.
Structural Intensity of Piston Compressor
活塞压缩机结构强度
17.
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
18.
Study on the formation of shear bands in BMGs by "in-situ" compression tests
大块金属玻璃剪切带形成的“原位”压缩实验研究