1.
INTERACTION BETWEEN A PIEZOELECTRIC SCREW DISLOCATION AND AN ELLIPTICAL INCLUSION WITH INTERFACIAL ELECTRICALLY CONDUCTIVE RIGID LINE
压电螺型位错与椭圆夹杂界面导电刚性线的干涉效应
2.
The Interaction of Magnetoelectroelastic Solids with Dislocation and Interfacial Defects;
压电磁材料中螺型位错与界面导电性缺陷的耦合干涉
3.
Interaction between Screw Dislocation and Circular Imperfect Interface with Crack in Piezoelectric Materials
压电材料中螺型位错与含裂纹非理想界面圆形夹杂的干涉效应
4.
The Interaction between the Screw Dislocation and the Inclusion with Imperfect Interface;
螺型位错与含缺陷非理想界面夹杂的干涉问题
5.
ELASTIC ANALYSIS OF A SCREW DISLOCATION INSIDE A COATED INHOMOGENEITY WITH IMPERFECT INTERFACES
含非完整界面涂层夹杂中螺型位错的弹性分析
6.
screw dislocation
螺旋位错 -晶格缺损
7.
Screw hollow and motor spindle are distributed staggered and equally.
螺纹安装孔的位置与电装电机轴线成错开对称分布。
8.
Elastic, Viscoelastic and Moving Interaction between Composite Materials with Typical Defects and Screw Dislocations;
复合材料典型缺陷与螺型位错的弹性、粘弹性及运动干涉效应
9.
Controlling strike energy and stroke position in an electrical screw press
电动螺旋压力机的打击能量与回程位置控制
10.
Development of Twin-screw Extruder for Carbon Stick of Dry Battery and Study on Twin-screw Geometry Modeling;
干电池用炭精棒双螺杆挤压机的开发研制和螺杆几何造型的研究
11.
Interaction of a Screw Dislocation with Interfacial Edge Crack in Magneto-electro-elastic Bi-material;
磁电弹双材料中螺位错与界面边裂纹的相互作用
12.
Interaction between Screw Dislocations and Circular Inclusions with Imperfect Interfaces in Anisotropic Materials;
各向异性材料中螺型位错与含非完整界面圆形夹杂干涉效应
13.
Investigation on the Interaction between Screw Dislocation Dipole and Interfacial Defects;
螺型位错偶极子与双相材料界面缺陷的弹性干涉
14.
Interaction among a Screw Dislocation, Interfacial Crack and Inclusion under Uniform Heat Flux;
均匀热流场中螺型位错、界面裂纹与夹杂的相互作用
15.
A trinity system scheme for micro-ESG
一种小型静电陀螺仪三位一体系统方案
16.
ESG Rotor Minor Displacement Estimation Using Nonlinear ARX Model
基于非线性ARX模型的静电陀螺转子微位移估计
17.
Research on the Micromachined Gyroscope Electric Field and Its Piezo-electricity Coupling
新型双级解耦微机械陀螺的电场及压电耦合特性研究
18.
Do not get the wires under a screw, or caught in moving parts( e. g. seat railing).
不要把电线压在螺钉下面或夹在移动部件（如座位扶手）。