1.
Unified Analysis of Limiting Width-Thickness Ratio of Plate Elements in Axially Compressed Members
轴心压杆板件宽厚比限值的统一分析
2.
Capacity Calculation of Welded Axially Compressed Members with Thin-Walled Box Section
焊接薄壁箱形截面轴心压杆的承载力计算
3.
DIRECT METHOD OF SECTION DESIGN FOR PRESSED ROD OF WOOD
木结构中轴心压杆(柱)稳定设计的直接法
4.
CALCULATION INVESTIGATION OF LOCAL BUCKLING STABILITY FOR AXIALLY COMPRESSED SINGLE EQUAL LEG ANGLE MEMBERS
等边单角钢轴心压杆局部稳定计算问题的讨论
5.
The Interactive Buckling of T-Section Columns with Axial Compress;
T形截面轴心受压压杆的局部失稳与整体失稳
6.
Automobile and motorcycle spare parts, crankshafts, connecting rods, shafts, power steering shafts.
汽机车零件–轴、杆、轴及动力方向盘轴心.
7.
"The connecting rod carries the power thrusts from the piston to the crankpin. At the same time, the rod is in eccentric motion."
"连杆的作用是将活塞承受的压力传给连杆轴颈。同时,连杆做偏心运动。"
8.
hour counter jumper eccentric
时计数器跳杆偏心轴
9.
Experimental Study of Compressive Buckling for an Axial Compressible Rod
轴向可压缩压杆的压缩失稳实验研究
10.
Theoretical and Experimental Study on Q460 Single Equal Leg Angle Axial Compression Members
Q460高强等边单角钢轴心受压杆件的理论与试验研究
11.
Structure Optimization for Hydrostatic Supporting Bush of Crank Shaft and Rod Type Hydraulic Motor
曲轴连杆式液压马达静压支承连杆瓦结构优化
12.
stiff shaft centrifugal compressor
刚性轴离心式压缩机
13.
centrifugal-axial flow compressor
离心-轴流式压气机
14.
flexible-shaft centrifugal compressor
挠性轴离心式压缩机
15.
Research on Camshaft Connecting- Rod Type Low Speed High Torque Hydraulic Motors with High- Pressure Rank;
曲轴连杆式低速大扭矩液压马达的高压化研究
16.
Lift the ram and position the tappet (with the ball bearing) inside the tester cup.
举起压头，在测试杯中定位挺杆（带滚珠轴承）。
17.
The adjustment of rotation angle error of power box twin export axles of twin screw extruder
双螺杆挤压机动力箱双输出轴转角误差调整
18.
Dynamic Analysis and Simulation of the Automotive Air Compressor's Crank-Rod Mechanism
车用空压机曲轴连杆机构的动力学分析与仿真