1.
Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
安装进气歧管（见单元11-排气系统和进气歧管）。
2.
Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
拆下进气歧管（见单元11-排气系统和进气歧管）。
3.
Remove intake manifold bolts.
拆下进气歧管螺栓。
4.
Install charge air cooler hose to intake manifol
安装充电空气冷却油管到进气歧管。
5.
Intake Air Sensor Location—Engine
进气歧管空气感知器—0L引擎
6.
INTAKE MANIFOLD AIR TEMPERATURE SENSOR—ENGINES
进气歧管空气温度感知器—引擎
7.
Install throttle body to intake manifol
安装节气阀体至进气歧管。
8.
Air leak between the turbocharger and the intake manifol
透平增压器和进气歧管之间空气泄漏。
9.
The Research on the Performance of Timed Manifold Injection Hydrogen-Fueled Engine;
进气歧管喷射式氢气发动机性能研究
10.
This vacuum, called intake-manifold vacuum, varies as the operating conditions change.
这个真空叫做进气歧管真空。这种进气歧管真空随运转情况而变化。
11.
Disconnect vacuum hose from vacuum port on the intake manifol
自进气歧管真空口拆下真空软管。
12.
This device, called the manifold heat-control valve, is built into the exhaust and intake manifold.
这种装置称为“歧管热控制阀”，它拼装在排气与进气歧管中。
13.
Clean each injector bore at intake manifol
清洁进气歧管上每个喷嘴孔。
14.
Connect all components to intake manifol
连接所有组件到进气歧管。
15.
Numerical Simulation of the Backflow in the Intake Manifold on 4110 Diesel;
4110柴油机进气歧管进气回流数值仿真及优化
16.
Simulation Study on Charge Unevenness for Air Intake Manifold Construction
进气歧管结构对进气不均匀性影响的仿真研究
17.
Disconnect the exhaust pipe from the exhaust down manifold (refer to Group 11, Exhaust system and Intake Manifolds).
从排气下行管断开排气管（请参阅第11单元“排气系统和进气歧管”）。
18.
INTAKE MANIFOLD AIR TEMPERATURE SENSOR—ENGINE—PCM INPUT
进气歧管空气温度感知器—0L引擎—PCM输入