说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 聚乙烯熔体
1.
The differences in crystallinity between the HDPE after crystallized from the melt by cooling andthose obtained directly from the reactor were also studied and discussed.
观测聚乙烯熔体冷却结晶后的结晶度与初生态聚乙烯结晶度的差别。
2.
Study on Melt Density of PP and PS Foaming System
聚丙烯及聚苯乙烯发泡体系熔体密度的研究
3.
Investigation of Rheological Behavior of Metallocene and Conventional Polyethylene Blends
茂金属聚乙烯与通用聚乙烯共混物熔体的流变行为研究
4.
Melt Grafting of Glycidyl Methacrylate and Multi-monomer Styrene onto Polypropylene Powder
甲基丙烯酸缩水甘油酯-苯乙烯多单体熔融接枝粉末聚丙烯
5.
The Studies of Dynamic Rheological Behavior of Polyethylene, Polypropylene and Their Color Masterbatches;
聚乙烯、聚丙烯及其色母粒熔体动态流变行为研究
6.
EFFECTS OF MELT VISCOSITY ON THE PREFERENTIAL INTERCALATION BEHAVIOR OF CLAY IN IMMISCIBLE POLYPROPYLENE/POLYSTYRENE BLENDS
熔体黏度对黏土在聚丙烯/聚苯乙烯共混物中优先插层行为的影响
7.
RHEOLOGICAL AND CRYSTALLIZATION BEHAVIOR OF HDPE/POLYSILOXANE MELTS
高密度聚乙烯/聚硅氧烷共混物熔体流变特性与结晶行为
8.
A Study on Phase-mixing of Poly(∈-caprolactone)/Poly(vinyl chloride)after the Melting of Crystals
聚已内酯/聚氯乙烯共混物晶体熔化后相混合情况
9.
acrylonitrile styrene copolymer
丙烯腈-苯乙烯共聚体
10.
Polyethylene (PE) pipes and fittings--Determination of melt flow rate
GB/T9643-1988聚乙烯(pe)管材和管件熔体流动速率试验方法
11.
Design and Failure Analysis for Shaft Seal of Melt Polystyrene Pump
聚苯乙烯装置熔体泵轴封的失效分析和设计计算
12.
Production of high-MI polypropylene by using donor triethoxyisobutylsilane
异丁基三乙氧基硅烷作为外给电子体生产高熔融指数聚丙烯
13.
LDPE fusible interlining (low density polyethylene fusible interlining)
低密度高压聚乙烯热熔衬
14.
Crystallization and Melting Behaviors of PET/Styrene-Sodium Acrylate Ionomer Composites
PET/苯乙烯-丙烯酸钠离聚物的结晶及熔融行为
15.
Studies on Preparation and Properties of Styrene-Ethylene Butylene-Styrene(SEBS) Based Elastomer System Modified with Polypropylene (PP);
聚丙烯改性苯乙烯—乙烯/丁烯—苯乙烯弹性体体系的制备与性能研究
16.
Confined Isothermal Crystallizing Kinetics and Melting Behavior of Polyethylene Glycol(PEG) / Poly (vinyl alcohol) (PVA) Solid-Solid Phase Change Materials
聚乙二醇/聚乙烯醇固-固相变材料等温结晶动力学及熔融行为研究
17.
The PVC plasticating technology and the flowing simulation of melt in die
聚氯乙烯塑炼技术与机头内熔料流动模拟
18.
~13C NMR QUANTITATIVE STUDY OF CROSS-LINKING POLYETHYLENES IRRADIATED WITH~60C0 γ SOURCE IN MOLTEN STATES
熔态辐照交联聚乙烯的碳-13核磁共振定量研究