1.
Under other crystallization condition only single melting peak is observed.
在其它的结晶条件下观察到单熔融峰。
2.
The Effect of the Silicate System Crystallization Condition to the Melt Structure and the Morphology of the Crystal\Melt Interface
硅酸盐体系结晶条件对晶体生长界面附近熔体结构及晶体形貌的影响
3.
Expression, Protein Purification and Optimization of Crystalize Conditions for Plant Avirulance Gene AvrRpt2;
植物无毒基因AvrRpt2表达、蛋白质纯化分析及结晶条件的探索
4.
Studies on the Nucleation and Crystallization of Ammonium Tetramolybdate;
四钼酸铵晶体成核及结晶工艺条件的研究
5.
The Spherulitic Morphology of Nylon 612 and Its Formation Conditions in Isothermal Crystallization
尼龙612等温结晶的球晶形态与生成条件
6.
Research on the crystallization technological conditions of the hesperidin-copper complex
橙皮苷-铜配合物结晶工艺条件研究
7.
Study of Slab Quality on Unsteady Casting Conditions and Liquid Steel Behavior in Mold;
非稳态条件铸坯质量与结晶器钢液行为研究
8.
The Crystallization Behaviors of Bimodal HDPE/LDPE under Different Thermal and Pressure Histories;
双峰HDPE/LDPE在热压历史条件下结晶行为的研究
9.
Investigation on recrystallization texture in low-carbon steel sheet based on CSP technology
CSP条件下冷轧低碳钢板再结晶织构的研究
10.
Study on the non-isothermal crystallization and melting properties of cocoa butter
可可脂在非等温条件下结晶及融化特性的研究
11.
Criterion Conditions for Formation of a Single and Double Recirculation Flow Pattern in a Slab Continuous Casting Mold With Argon Blowing
吹氩板坯连铸结晶器内单双循环流的判别条件
12.
Crystallization Conditions of Ammonium Aluminum Sulfate from Acid Leachate of the Ash Containing Vanadium
含钒灰渣酸浸液结晶铵明矾的工艺条件
13.
MORPHOLOGY OF FRACTAL DIMENSION UNDER THE CONDITIONS OF DIFFERENT ZINC SILICATE CRYSTALLIZATION
不同条件下硅酸锌结晶形貌的分形维数
14.
Study on the Optimal Conditions for Sublimate Crystallization Refining of Pyromellitic Dianhydride
均苯四酸二酐凝华结晶精制的最佳条件研究
15.
Isothermal Crystallization Kinetics of Polylactic Acid from Different Initial States
不同初始条件下聚乳酸的等温结晶动力学
16.
Precipitation Behavior of Reinforced Phases in In-situ Crystallization of Hypereutectic Al-Mg-Si Melt Under Stirring Conditions
不同搅拌条件下过共晶Al-Mg-Si熔体中原位结晶强化相的析出行为
17.
The crystal and shining coating is gained by controlling the fitting processing parameters.
通过控制适宜的工艺条件得到结晶细致光亮的镀层。
18.
It remains in solution and does not crystalize out except in very dry conditions.
它仍留在溶液中，只有在非常干的条件下才结晶出来。