1.
geared ladle-hoist
齿轮传动的浇包起重机
2.
Effect of Melt Temperature in Outside Ladle on Microstructure and Hardness Distribution of 7075/6009 Aluminum Alloy
外浇包熔体温度对7075/6009铝合金铸锭组织和硬度分布的影响
3.
Effects of ladle inside melt temperature on microsturctures and properties of 7075/6009 composite plates
内浇包熔体温度对7075/6009复合板材组织性能的影响
4.
Research on Properties of MgO-Al_2O_3 Based Castable for Ladle Slag Line;
钢包渣线用镁铝质浇注料的性能研究
5.
Influencing Factors and Improving Measures of Automatic Pouring in Small Ladle
影响钢包自动开浇的因素及改进措施
6.
Factors Effecting Surface Quality of Hypo-Peritectic Steel Slab Cast at High Speed
影响高速浇铸亚包晶钢表面质量的因素研究
7.
Development and Application or Ban-cite Based High Alumina-Spinel Castables for Ladle Lining
矾土基高铝—尖晶石质钢包浇注料的研制和应用
8.
Investigation and Development of Magnesia-zircon-chome Non-carbon Refractory Castables for Ladle Slag Line;
镁锆铬质无碳钢包渣线耐火浇注料的研究开发
9.
Research and Application of High Alumina Bauxite Based-spinel Castable for Ladles;
矾土基高铝—尖晶石钢包浇注料的研究与应用
10.
The Study on Preparation and Properties of MgO-based Castable for Tundish Impact Plate;
中间包冲击板用镁质浇注料的制备及性能研究
11.
Study and application on Al_2O_3-MA-Cr_2O_3 castables for slag-line of ladles;
Al_2O_3-MA-Cr_2O_3质钢包渣线浇注料的研制与应用
12.
Study on the Control of Temperature in Continuous Casting Tundish with Low Superheat
低过热度浇铸的连铸中间包温度控制研究
13.
The Improvement Experiment and Application of Ladle Aluminum-Magnesium Spinel Castables
钢包铝镁尖晶石浇注料的改进试验及应用
14.
The Application of Tundish Plug Rod Blowing Argon in Vacuum Pouring of Ingot
中间包塞棒吹氩在钢锭真空浇注中的应用
15.
It is called“ The Fourth Generation Castable”.
莫来石质自流浇注料适用于钢包永久衬和中间包永久衬。
16.
The pouning material are loose-packed and prerared and made on the spot according to require ammont.
该浇注料是采用散包料包装，按需用量现场配制而成。
17.
It is noted for high quality of heat preservation, high strength, long using life and good erosion resistace.
该产品被誉为“第四代浇注料”适用于钢包包底及座砖周围、炉顶填缝。
18.
Analysis on Entrapped Slag Defect of Cast Steel Wheel Poured Continuously by Bottom Pouring Ladle
用底注包连续浇注铸钢车轮产生夹渣缺陷的分析