说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 密封焊
1.
Seat hardfaced with SS410 and seal welded.
配置410不锈钢和密封焊接的阀座硬面。
2.
Seat ring is seal welded to eliminate leak path.
阀座环通过密封焊接,消除泄漏通道。
3.
Properties Analysis and Structural Optimization for the Welded Metal Bellows in Mechanical Seals;
机械密封焊接金属波纹管波片力学性能分析及结构优化
4.
Study on Wear Resistance of the Electrodes of Cr13 Alloy System for Valve Sealing Surface;
Cr13系阀门密封面堆焊焊条耐磨性的研究
5.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
6.
welded metal-bellows mechanical seal
焊接金属波纹管机械密封
7.
New Stainless Steel Heap Welding Technique for Main Steam Valve Sealing Suface
主蒸汽阀门密封面不锈钢堆焊新工艺
8.
The point of penetration through the diaphragms is sealed by E-beam welding.
通过横膈膜的穿透点用电子束焊接来密封。
9.
4 Ducts shall be suitably welded or sealed for leakage.
管路有合适的焊接和密封,来保证不泄漏。
10.
APPLICATION OF WELDED METAL BELLOW MECHANICAL SEAL AND ITS EXISTENTIAL PROBLEMS
焊接金属波纹管机械密封的应用与存在的问题
11.
Repairing Suffer-press Valve Airproof Surface of Import 350 MW Steamer with Tiny Arc Welding
进口350MW汽轮机中压调阀密封面微弧焊修复
12.
If too much solder is use, it may flow past tube and clog seating area.
如果采用太多的焊料,则焊料可能流过管道并阻塞密封区域。
13.
In the second part, the preliminary experience of plasma powder overlaying work with valve sealing surface is introduced.
第二部份介绍阀门密封面等离子粉末堆焊工作的初步经验。
14.
Cause and Solution for Invalidation for the Welded Metal Bellow Mechanical Seal for Liquid Hydrocarbon Pump
液态烃泵用焊接金属波纹管机械密封的失效原因及解决办法
15.
Panel welding was used to simulate pipe welding on any key positions by adjusting the angle of welding process device.
特别是在焊机安装过程之中,解决了焊机应用于高压环境的密封问题。
16.
pressurizing window
密封封口(电缆), 气密口
17.
weatherstripping,thresholds & seals
密封条,门槛及密封胶
18.
a watertight compartment, joint, seal
水密室、 水密接合、水密封.