1.
Study on the Coupling of Laser Beam and Powder and High-level Accumulate Technology Based on Inside-laser Coaxial Powder Feeding
基于光内同轴送粉光粉耦合及高层成形技术的研究
2.
The Influence of Inside-Laser Coaxial Powder Feeding Technology Parameter on Forming under the Action of Annular Facula;
环形激光作用下同轴送粉熔覆工艺参数对成形的影响
3.
Primary Study of Lean Parts on Inside-Laser Coaxial Powder Feeding Device and Process of Laser Cladding Rapid Prototyping;
激光熔覆快速成形光内同轴送粉斜壁堆积的初步研究
4.
Research on the Laser Cladding Inclined Wall Accumulation Based on the Internal Laser Coaxial-powder Feeding Technology
基于光内同轴送粉技术的激光熔覆斜壁堆积成形研究
5.
Study on the Technology of Induction Melting and Casting with Direct Feeding Powder
直接送粉在轴表面感应熔铸合金层的工艺研究
6.
Microitructure and Friction and Wear Behavior of Nanostructured Chromium Oxide Coatings Deposited by Plasma Spraying with Axial Powder Feeding
轴向送粉等离子喷涂纳米氧化铬涂层的结构与性能
7.
Numerical Simulation of Temperature Field of Coaxial Powder Flow in Laser Cladding
激光熔覆中同轴粉末流温度场的数值模拟
8.
CCD Measurement of Temperature Field of Coaxial Powder Flow in Laser Cladding
激光熔覆中同轴粉末流温度场的CCD检测
9.
Ash is conveyed to the disposal point at power plants in various ways.
在发电厂粉灰通过不同的方式运送到处理地点。
10.
Dense-phase Pneumatic Conveying for Pulverized Coal with Different Mean Particle Size Under High Pressure
不同平均粒径煤粉的高压密相气力输送
11.
Experimental Study on the Characteristics of High-pressure and Dense-phase Pneumatic Conveying of Different Pulverized Coal
不同煤粉高压密相气力输送特性实验研究
12.
conveyer screw shaft coupling
输送机螺旋轴联轴节
13.
Media: The material that stores or transmits data, for example, floppy discs, coaxial cable, etc.
媒体:贮存或传送数据的物料。例如软碟，同轴电缆等。
14.
Conducting ring, pipe heater, bearing, synchronous belt, conveyance belt and so on are of import brands.
导电环、加热管、轴承、同步带、输送带等采用进口产品。
15.
Study on Mechanical Performance and Damage of Reactive Powder Concrete in Different Steel Fiber Volume Fractions under Uni-axial Compression;
不同钢纤维掺量活性粉末混凝土单轴受压力学特性及损伤分析
16.
pivot-bucket conveyor-elevator
枢轴吊斗提升输送机
17.
An intermediate shaft between the powered and driven shafts in a belt drive.
副轴，天轴传送带上介于动力轴与驱动轴之间的中间轴
18.
Interference fit level for electricity spindle on superfine cellulosine disintegrator
超细木粉粉碎机电主轴的过盈配合量