1.
Model Studies on Multitube Blow Tank Fly Ash Conveyor in Cold State
多管流化罐返料器的冷态模型实验研究
2.
Modeling of Gas-Phase Linear Low Density Polyethylene Fluidized-Bed Reactor in Condensed Mode;
LLDPE聚合反应器冷凝态操作模型化研究
3.
Dynamic Simulation and Experimental Verification of The Oxford Stirling Cryocooler
牛津型斯特林制冷机动态模拟及实验验证
4.
Experimental Study and Numerical Simulation of a Novel Burner;
一种新型燃烧器的冷态试验与数值模拟研究
5.
A Study on Dynamics Characteristics and Simulation Model of Air-water Combined Slag Cooler;
风水联合冷渣器动态特性及仿真模型的研究
6.
Roll Forming Machine with Variable Cross-section Transmission of Three-dimensional Modeling and Dynamic Simulation
变截面冷弯成型机传动的三维建模与动态仿真
7.
Tension Calculation Model and Setting During FGC Process in Cold Strip Rolling
冷连轧动态变规格张力计算模型及设定研究
8.
Dynamic Control Model of Secondary Cooling Based on the Finite Volume Method
基于有限体积法的板坯连铸二冷动态模型
9.
Study on secondary cool dynamic controlling model of continuous casting for medium thickness slab
中薄板坯连铸二冷动态控制模型的研究
10.
Adiabatic effectiveness measurements on rotating curvature models
旋转状态下曲率模型上的气膜冷却效率
11.
Development and Application of Dynamic Secondary Cooling Water Model in Slab Casting
板坯连铸二冷动态配水模型的开发与应用
12.
Research and application of dynamic water distribution model for secondary cooling section in slab continuous casting
板坯连铸二冷段的动态配水模型研究与应用
13.
Numerical simulation and optimization of cold airflow field in sprayed calciners
喷腾型分解炉内冷态流场的模拟与优化设计
14.
Cold-state Modeling of Modified HT-NR3 Swirl Burners
改进型HT-NR3旋流燃烧器冷态模化试验研究
15.
Analysis for pressure cast model and secondary cooling water dynamical model of continuous slab caster in Bao Steel
宝钢板坯连铸机压缩浇注模型及二冷水动态模型剖析
16.
The Experimental Study and Thermal Numerical Simulation of SL-ⅡPyrolyzer;
SL-Ⅱ型乙烯裂解炉冷态流动特性试验研究及热态数值模拟
17.
Development and Application of Dynamic Secondary Cooling and Dynamic Soft Reduction Control Model for Bloom Caster
大方坯连铸动态二冷与动态轻压下控制模型的开发与应用
18.
Cold Simulation Experiment and Numerical Simulation on a New Type of Low NOx Combustion Swirl Burner;
新型低NOx旋流燃烧器冷态模拟实验研究与数值模拟