1.
The Influence of Carbon Content on the Hardness and Microstructure of Layer on Weld Deposit Rob with Multi-elements Alloying System
碳含量对多元合金系堆焊焊条堆焊层硬度的影响
2.
Effect of Heat Treatment on Hardness of Iron-based Cr-Mo-W-Mn-Ni Alloy Surfacing Layer
热处理对Cr-Mo-W-Mn-Ni铁基合金堆焊层硬度的影响
3.
CONTAINING TI AND B HARD--FACING EELECLRDE RESEARCH ANALYSIS FOR THE HARDNESS WEAR-RESISTING ANTI-ARAC PROPERTY
含钛硼堆焊焊条研究——堆焊金属的抗裂、硬度、耐磨性分析
4.
Research on Microstructure and Micro-hardness of Deposited Metals with Steel 45 as Substrate Material
45钢堆焊金属组织及显微硬度研究
5.
The Development of Metal Powder-cored Wire for Submerged Overlaying with High Hardness and Toughness;
高硬度高韧性耐磨埋弧堆焊用药芯焊丝的研制
6.
Research on microstructure and micro-hardness of overlaying deposited metal of D227 and D237 electrode
D227、D237焊条堆焊金属组织及显微硬度研究
7.
Effect of Ceramic Phase on Microstructure and Property of Ferro-base Surfacing Layer
陶瓷硬质相对铁基堆焊层组织与性能的影响
8.
In the paper, mainiy discusses character of crack of high hardness hardfacing layer( HRC62 over), its growing period and adopting technology measure to prevent from producing of crack.
文章主要讨论了高硬度堆焊层裂纹的特征、长时期以及防止裂纹产生的工艺措施。
9.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
10.
Studies on Strength and Toughness of Ultra-high Hardness，Wear-resistance and Cracking-resistance Hardfacing Materials;
超高硬度耐磨抗裂堆焊材料的强韧化研究
11.
Development of CO_2 Gas Shielding Flux Core Wire with High Hardness and Research on Wear Resistant Property
高硬度CO_2气保护堆焊药芯焊丝的研制及其耐磨性能研究
12.
By means of multi layer and multi pass lap surfacing, the surfacing layer with big thickness and area can be acquired.
采用多层焊和多道搭接工艺可获得大厚度、大面积堆焊层。
13.
Effect of Welding Process on Microstructure and Properties of Surfacing Layer with D212 Welding Electrode
D212焊条堆焊工艺对堆焊层组织性能的影响
14.
The technology requirements and characteristics of overlay of a refractory steel build-up welding wire are introduced.
介绍了一种热强钢堆焊焊条的堆焊工艺要求、焊层特性。
15.
Study on Strip Surfacing Technologies and Mechanical and Property of Surfacing Deposit for 2.25Cr1Mo Steel;
2.25CrlMo钢带极堆焊工艺及堆焊层组织、性能研究
16.
Study on the Overlaying Property and Hot Corrosion Resistance of Fe_3Al Alloy Overlayer;
Fe_3Al合金堆焊及堆焊层的耐热腐蚀性能研究
17.
Research on Corrosion Resistance of Overlaying Welding Layer Using A102,A132 and A302 Stainless Steel Electrode
A102、A132和A302焊条堆焊层耐蚀性研究
18.
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。