1.
Study of the Optimum Operating Gas Pressure of the Optically Pumped FIR Laser
光泵远红外激光工作气体压强的最佳值
2.
Working Gas Study for End Cap Shower Counter of Beijing Spectrometer
北京谱仪端盖簇射计数器工作气体的研究
3.
Carnot Cycle of Imperfect Gas as Working Material;
非理想气体作为工作物质的卡诺循环
4.
gas-operated metalworking appliance using heat from inflammable gas in jet of oxyge
气动金属加工装置,利用来自氧气喷嘴的可燃气体产生的热工作
5.
The gas distribution system shall cover from the gas outlets on the benches or fume hoods to gas regulator manifolds at the cylinder area.
气体管路安装从气瓶站总阀门到工作台上各个气体阀门。
6.
workplace air-determination of vinyl chloride (charcoal tube/gas chromatographic method)
工作场所空气-氯乙烯的测定-木炭管/气体色谱法
7.
Discussion on Integrative Working Pattern of Oil-Gas Exploration and Exploitation;
油气勘探开发一体化工作方式的探讨
8.
Gaseous helium is used as a coolant during the drawing of optical fibers, as a carrier gas for chromatography, and as a leak detection gas in a variety of industries.
气态氦在光学纤维拉制中用作冷却剂，在色谱仪中用作运载气体，在许多工业中用作检漏气体。
9.
Efficiency of the Reversible Cycle Employing Ideal Fermi Gas and Ideal Bose Gas As Working Substance
理想费米气体和理想玻色气体为工作物质的可逆循环的效率
10.
Too high temperature of the operating temperature or chemical gas in the operating ambience will cause hoses cracking.
工作环境温度过高或工作空间有化学气体，可能会导致软管龟裂。
11.
WORKING PRINCIPLE OF MICROWAVE PLASMA CVD SET UP
微波等离子体化学气相沉积装置的工作原理
12.
Repair and maintenance operations should not affect the quality of the medicinal gases.
任何维修和保养工作不能影响医用气体的质量。
13.
Derivation of Efficiency of Carnot Cycle with Arbitrary Gas Equation of State;
以任意气体为工作物质的卡诺循环效率的推导
14.
Research on Some Key Technologies of the Aerostatic Stage
基于气体润滑静压工作台的若干关键技术
15.
Operating Characteristics of a Heavy Current Three-electrode Gas Spark Switch
一种大电流三电极气体火花开关的工作特性
16.
Future work will address the recovery of + water from the product gas,and whether the fluidisation gas in the pyrolysis gas may be air.
如果在高温分解气中的高速气流输送气体可能晾干，未来的工作将忙于对产气中的+水的恢复。
17.
A portable, manually operated container that ejects a spray, foam, or gas under pressure.
气溶胶弹式容器在压力作用下喷射气雾、泡沫或气体的可移动的手工操作的容器
18.
All point of use shall have suitable valves and fittings within easy reach.
所有的气体管路在工作台上有合适的控制阀门，便于操作。